Log the flood-stage water line along a Kenh Doi canal-adjacent lane (2026-08-03)

District 8's Kenh Doi canal-front lanes flood during heavy monsoon rain and high tide combined, an increasingly common event as the canal's stilt-housing stretches get squeezed by rising water. A dry-path visual log gives the ward a real record of flood depth and frequency. Standard: UN-Habitat urban flood-risk monitoring guidance; SDG 11.5 (reduce disaster impacts). Proof: Timestamped waterline photo + log Method (UN-Habitat urban flood-risk monitoring guidance; SDG 11.5 (reduce disaster impacts).): 1. Stand on dry raised pavement at the marked observation point during or right after rain. 2. Photograph the waterline against the fixed reference mark. 3. Record date, time, and rainfall/tide condition. 4. Note any visible drainage blockage from the public vantage point. 5. Submit the photo and log entry. Done when: dated photo of waterline vs fixed mark; GPS coordinates; rainfall/tide condition noted; log sheet entry

Where

Canal-adjacent lane, Kenh Doi, Ward 9, District 8, Ho Chi Minh City, Vietnam

Pay

$160 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

Timestamped waterline photo + log

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-08-10

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–90 minutes. Method of record: FEMA floodplain + green-infrastructure siting screen

Bring

• GPS phone
• tape/ruler for deposition depth
• metals field kit (if sediment screen in scope)
• boots + gloves
• camera

Steps

1. 1. Confirm post-event conditions are safe; navigate to the site; record GPS.
2. 2. Photograph deposited sediment / affected area.
3. 3. Measure deposition depth at representative points.
4. 4. If a sediment contaminant screen is in scope, run the metals field kit and record values.
5. 5. Note debris, hazards, and the extent (sketch).
6. 6. Enter depth, any analytes, hazard notes, GPS, photos into the proof record; sign.

If it does not match the plan

• Unstable ground / submerged debris / contaminated water -> document from safe footing; do not enter.
• Elevated metals in deposited sediment -> flag before any reuse; recommend lab confirm.

What counts as done

• dated photo of waterline vs fixed mark
• GPS coordinates
• rainfall/tide condition noted
• log sheet entry

Proof is measured against these, not judged by taste.