Anyone can start here · the refuge's public 4 mile auto tour route, Attwater Prairie Chicken National Wildlife Refuge (U.S. Fish and Wildlife Service, public national wildlife refuge), 1206 APC NWR Rd, Eagle Lake, TX 77434, Colorado County
Document residual bunchgrass nesting cover, zone 1, the refuge's public 4 mile auto tour route, Attwater Prairie Chicken National Wildlife Refuge (U.S. Fish and Wildlife Service, public national wildlife refuge), 1206 APC NWR Rd, Eagle Lake, TX 77434, Colorado County (2026-08-04)
Document residual bunchgrass nesting cover, zone 1, the refuge's public 4 mile auto…. Fund it for $95. Proof lands on-chain when it's done.
The Attwater's prairie chicken needs taller residual bunchgrass immediately adjacent to its open lek ground for nest concealment and brood rearing, the structural opposite of the short open lek ground, and this zone's residual cover has no recent record to guide refuge habitat management before the next nesting season. Standard: US Fish and Wildlife Service Attwater's prairie chicken recovery habitat guidance plus USDA NRCS conservation practice standard 645 upland wildlife habitat management, applied here to residual bunchgrass nesting and brood-rearing cover structure, Attwater Prairie Chicken National Wildlife Refuge, Colorado County, TX, observation and management of general habitat structure only, never a nest search. SDG 15.5. Proof: document only observation log plus residual cover density note plus GPS plus ranked follow on note Method (US Fish and Wildlife Service Attwater's prairie chicken recovery habitat guidance plus USDA NRCS conservation practice standard 645 upland wildlife habitat management, applied here to residual bunchgrass nesting and brood-rearing cover structure, Attwater Prairie Chicken National Wildlife Refuge, Colorado County, TX, observation and management of general habitat structure only, never a nest search. SDG 15.5.): 1. 1. From the refuge's public auto tour route or a designated pull off, photograph a visible zone of prairie ground adjacent to open lek habitat, noting residual bunchgrass height and density, without leaving the route. This is observation of general residual cover structure only across the visible zone, never a search for, approach to, or attempt to locate an active nest at any point; do not use playback or calls, and do not leave the auto tour route or a designated pull off. 2. 2. Note whether the residual bunchgrass cover needed for nesting concealment and brood rearing is thin, bare, or gapped. 3. 3. Photograph the zone from a fixed reference point for future comparison. 4. 4. Record a ranked follow on note naming the gap for the native bunchgrass planting crew, flagging the breeding-season restriction. Done when: Photo of the prairie zone taken from the auto tour route or a designated pull off; Note of the residual bunchgrass height and density, and any bare or gapped patches; Confirmation this was general habitat-structure observation only, never a nest search, no playback or calls used; Ranked follow on note naming the gap for the native bunchgrass planting crew; GPS waypoint of the surveyed zone
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–120 minutes. Method of record: Point-count / transect species survey (Breeding Bird Survey + Xerces pollinator-count protocols)
Bring
- binoculars
- field ID guide or app
- GPS phone
- data sheet / recorder
- timer
- camera
Steps
- 1. Navigate to the first survey point; record GPS; note start time, weather, and wind (surveys pause in rain/high wind).
- 2. Wait a settling minute, then run a fixed-duration count (e.g., 5 min) within a fixed radius; record every species seen/heard and the count of each.
- 3. Photograph the habitat and any species you can; note any threatened/target or invasive species.
- 4. Move to the next point along the transect (keep points >=200 m apart) and repeat the count.
- 5. Record total effort (points, duration) and observer.
- 6. Enter the per-point species lists + counts, GPS, weather, effort, and photos into the proof record; sign.
If it does not match the plan
- Threatened/at-risk or target species observed -> flag for the land steward (with location) for protection planning.
- Invasive species dominant / native diversity very low -> flag for a management plan.
- Rain or high wind -> pause/reschedule; counts under poor conditions are not valid.
What counts as done
- Photo of the prairie zone taken from the auto tour route or a designated pull off
- Note of the residual bunchgrass height and density, and any bare or gapped patches
- Confirmation this was general habitat-structure observation only, never a nest search, no playback or calls used
- Ranked follow on note naming the gap for the native bunchgrass planting crew
- GPS waypoint of the surveyed zone
Proof is measured against these, not judged by taste.
Funding this work is a purchase or a vote, same act: you either want this done here, or you want the world to contain it. Either way the money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1785875001511_12r6q6r","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.