intermediate work · the public Palo Duro Canyon State Park, a canyon-floor bank-top segment along the Prairie Dog Town Fork of the Red River near Canyon, TX 79015, Randall County
Plant native riparian cover on a Prairie Dog Town Fork canyon riverbank, site 5, the public Palo Duro Canyon State Park, a canyon-floor bank-top segment along the Prairie Dog Town Fork of the Red River near Canyon, TX 79015, Randall County (2026-08-04)
Plant native riparian cover on a Prairie Dog Town Fork canyon riverbank, site 5,…. Fund it for $165. Proof lands on-chain when it's done.
The survey above found a bare or eroding bank-top segment along the Prairie Dog Town Fork inside Palo Duro Canyon State Park, and a hand planted native riparian buffer above the waterline would otherwise leave this canyon-bottom bank shedding soil for another season. Standard: USDA NRCS conservation practice standard 391 riparian forest buffer plus Texas Stream Team riparian assessment protocol (canyon-bottom native bank-top planting above the waterline), applied here to a Prairie Dog Town Fork of the Red River reach inside the public Palo Duro Canyon State Park near Canyon, TX, Randall County. SDG 15.1 and 6.6. Proof: before after photos plus species and plant count record plus GPS Method (USDA NRCS conservation practice standard 391 riparian forest buffer plus Texas Stream Team riparian assessment protocol (canyon-bottom native bank-top planting above the waterline), applied here to a Prairie Dog Town Fork of the Red River reach inside the public Palo Duro Canyon State Park near Canyon, TX, Randall County. SDG 15.1 and 6.6.): 1. 1. Confirm the bank-top segment with the state park office and photograph the bare or eroding bank before starting, staying above the waterline on the gentle canyon floor. 2. 2. Hand dig planting holes on the bank top only, hand tools only, no power equipment, staying well above the waterline and never entering the river. 3. 3. Hand plant native Prairie Dog Town Fork canyon riparian species (plains cottonwood, sandbar willow, western soapberry) at the bank-top margin. 4. 4. Hand mulch around the new plantings and photograph the planted bank from the matching before vantage, recording species and plant count. Done when: Before photo of the bare or eroding bank-top segment; Confirmation only hand tools were used, work stayed above the waterline, never entering the river; Native species and plant count recorded; After photo of the planted bank-top segment from the matching vantage
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 90–180 minutes. Method of record: Urban-creek riparian restoration install (native buffer planting, bank stabilization, invasive/litter removal) per NRCS CPS 391 riparian forest buffer + EPA nonpoint-source BMP practice -- hands-on restoration, not a bioassessment survey; assess->clear->plant/stabilize->verify
Bring
- shovel / dibble bar
- native bare-root or plug plantings (locally sourced)
- erosion-control matting or willow stakes (bank-stabilization sites)
- loppers / hand saw (invasive removal)
- gloves + trash bags (litter pass)
- camera
- GPS-enabled phone
Steps
- 1. Walk the reach with the site plan (or the standing bioassessment/watershed-health finding, if one exists) and photograph the bank/buffer segment as found: bare soil, invasive cover, litter, erosion.
- 2. Clear invasive growth and litter from the planting zone by hand, bagging trash separately from green waste; leave native volunteers in place.
- 3. Plant native riparian species (or set willow stakes / erosion-control matting) at the spacing and depth the site plan calls for, working from the top of bank downward; water each planting in.
- 4. Stake or anchor any erosion-control matting so it will not lift in the next high-flow event, and mulch around new plantings kept clear of stems.
- 5. Photograph the finished segment from the matching vantage, record species/count or matting area installed, and note any follow-up watering the planting needs.
If it does not match the plan
- Steep, actively eroding or undercut bank -> stabilize with matting/stakes before planting; never plant into a bank that is still actively failing.
- Standing or fast-moving water in the work zone -> stay on the bank, never enter the channel; document from the bank and reschedule if the reach is unsafe.
- Suspected illicit discharge, sheen, or odor in the reach -> stop, photograph from a safe distance, do not touch, and report to the MS4/311 line rather than working through it.
What counts as done
- Before photo of the bare or eroding bank-top segment
- Confirmation only hand tools were used, work stayed above the waterline, never entering the river
- Native species and plant count recorded
- After photo of the planted bank-top segment from the matching vantage
Proof is measured against these, not judged by taste.
Funding this work is a purchase or a vote, same act: you either want this done here, or you want the world to contain it. Either way the money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1785875600052_xphsyg3","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.