Stabilize a crumbling mesa rim edge in the Lampasas Cut Plain, site 3, a public county road right of way in the Lampasas Cut Plain mesa country between Lampasas and Lometa, TX, Lampasas County (2026-08-04)

The survey above found a crumbling, undercutting caprock rim edge on this Lampasas Cut Plain mesa, and licensed crew erosion control matting and native plantings would otherwise leave the rim retreating another season. Standard: USDA NRCS conservation practice standard 342 critical area planting plus Texas Parks and Wildlife Department rangeland erosion guidance, applied here to the eroding, undercutting caprock rim edge of a Lampasas Cut Plain mesa between Lampasas and Lometa, TX, Lampasas County. SDG 15.1 and 15.3. Proof: fall protection confirm plus before after photos plus length stabilized and materials record plus GPS Method (USDA NRCS conservation practice standard 342 critical area planting plus Texas Parks and Wildlife Department rangeland erosion guidance, applied here to the eroding, undercutting caprock rim edge of a Lampasas Cut Plain mesa between Lampasas and Lometa, TX, Lampasas County. SDG 15.1 and 15.3.): 1. 1. Confirm the segment and stabilization plan, and photograph the crumbling rim edge before starting, from the same setback vantage used in the survey. 2. 2. Using fall protection anchoring appropriate to the site, a trained and credentialed crew installs erosion control matting along the eroding rim edge. 3. 3. Hand plant native, deep rooted grass plugs into the matting at the rim edge to hold the caprock soil in place. 4. 4. Photograph the stabilized segment from the matching before vantage and record the length stabilized and materials used. Done when: Fall protection anchoring confirmation for the crew working at the rim edge; Before photo of the crumbling, undercutting rim edge; Erosion control matting and native grass plug material record; Length of rim edge stabilized recorded; After photo of the stabilized rim edge from the matching vantage

Where

a public county road right of way in the Lampasas Cut Plain mesa country between Lampasas and Lometa, TX, Lampasas County

Pay

$230 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash. You see which before you claim, never after.

Proof

fall protection confirm plus before after photos plus length stabilized and materials record plus GPS

This is exactly what gets it approved. Nothing settles without it.

Level

advanced

Open until

2026-09-03

How this work is done

A documented method, so this packet comes out the same whoever does it. Typically 45–120 minutes. Method of record: Point-count / transect species survey (Breeding Bird Survey + Xerces pollinator-count protocols)

Bring

• binoculars
• field ID guide or app
• GPS phone
• data sheet / recorder
• timer
• camera

Steps

1. 1. Navigate to the first survey point; record GPS; note start time, weather, and wind (surveys pause in rain/high wind).
2. 2. Wait a settling minute, then run a fixed-duration count (e.g., 5 min) within a fixed radius; record every species seen/heard and the count of each.
3. 3. Photograph the habitat and any species you can; note any threatened/target or invasive species.
4. 4. Move to the next point along the transect (keep points >=200 m apart) and repeat the count.
5. 5. Record total effort (points, duration) and observer.
6. 6. Enter the per-point species lists + counts, GPS, weather, effort, and photos into the proof record; sign.

If it does not match the plan

• Threatened/at-risk or target species observed -> flag for the land steward (with location) for protection planning.
• Invasive species dominant / native diversity very low -> flag for a management plan.
• Rain or high wind -> pause/reschedule; counts under poor conditions are not valid.

What counts as done

• Fall protection anchoring confirmation for the crew working at the rim edge
• Before photo of the crumbling, undercutting rim edge
• Erosion control matting and native grass plug material record
• Length of rim edge stabilized recorded
• After photo of the stabilized rim edge from the matching vantage

Proof is measured against these, not judged by taste.