the Beechwood Trail near the day-use area, Village Creek State Park, 8854 Park Road 74, Lumberton, TX 77657, Hardin County
Document off-trail rutting on the deep sand ridge, site 2, the Beechwood Trail near the day-use area, Village Creek State Park, 8854 Park Road 74, Lumberton, TX 77657, Hardin County.
This stretch of deep, droughty sandyland trail has off-trail rutting or braided informal paths, and this sand does not recover once compacted Read all of it
Not funded yet. Settles as earned credit, $80 proposed.
Proof it takes, the deadline, the level
- Proofdocument only stand off photo log plus rut or braided path measurement plus GPS plus ranked follow on note
- Open until2026-11-04
- Levelentry
All of it: the words, the place, the proof
This stretch of deep, droughty sandyland trail has off-trail rutting or braided informal paths, and this sand does not recover once compacted or rutted, so no photo record exists to prioritize it for the park's stabilization work.
Offer to pay $80. The receipt lands onchain once the proof is approved.
Safety, read before you claim
Document only, stay on the maintained trail tread at all times, never step into the rutted or braided area to measure it. This work never leaves the maintained trail tread. The deep, droughty sand off-trail does not recover once compacted or rutted, and this trail sits directly above a fragile bog and seep system; staying on the tread protects both. Venomous cottonmouth, copperhead, and timber rattlesnake are present in this sandyland and along the creek corridor; watch foot placement at all times, never reach into brush, log piles, or leaf litter by hand, and never approach, corner, feed, or bait any wildlife under any circumstance, at any skill level. Chiggers and ticks are heavy here; tuck pants into boots and check thoroughly after work. Work in early morning hours before summer heat peaks, carry more water than you think you need, and Southeast Texas Big Thicket summer heat, humidity, mosquitoes, chiggers, and ticks are all real here. This survey recurs seasonally.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. From the maintained trail tread, photograph a stretch showing off-trail rutting, braided informal paths, or bare exposed sand where hikers or bikers have left the tread.
- 2. Measure the rut depth or braided-path width using a tape measure held from a stable stance on the trail.
- 3. Note whether the rutting appears to be spreading, the deep, droughty sand here does not recover once compacted or rutted.
- 4. Record a ranked follow on note naming the stretch for the park's trail stabilization crew.
What counts as done
- Photo of the rutted or braided-path stretch taken from a stable stance on the trail
- Rut depth or braided-path width measurement with a tape measure visible in frame
- This work never leaves the maintained trail tread. The deep, droughty sand off-trail does not recover once compacted or rutted, and this trail sits directly above a fragile bog and seep system; staying on the tread protects both.
- Ranked follow on note naming the stretch for the park's trail stabilization crew
- GPS waypoint of the surveyed trail stretch
Proof is measured against these, not judged by taste.
The standard this serves
Soil Health. Soil health is the discovery, now written into USDA standards, that soil is not dirt but a living body: it breathes, digests, holds water, and can sicken or recover. The tests are wonderfully physical. Time how fast water soaks in. See whether a clod holds together in water or falls apart. Smell for the sweetness of organic matter. Mastery looks like a farmer who can read a handful of ground like a page. This packet is one plot examined by those methods and recorded, one honest page in the story of a piece of land.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1785902546183_ok3dfvu