intermediate work · a public county-road right of way bordering rice-belt farmland north of Wharton, Wharton County, TX 77488
Plant a native buffer strip along a rice field edge, county-road corridor, north of Wharton, stretch 3
Fund it for $170. Proof lands onchain when it's done.
The survey above found a bare or lawn-only field-edge margin along the county-road corridor, north of Wharton, and a native buffer strip along the public road right of way stabilizes the margin and adds vegetation structure to the field-edge habitat this rice belt provides for wintering wildlife.
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 45–120 minutes. Method of record: Point-count / transect species survey (Breeding Bird Survey + Xerces pollinator-count protocols)
Bring
- binoculars
- field ID guide or app
- GPS phone
- data sheet / recorder
- timer
- camera
Steps
- 1. Navigate to the first survey point; record GPS; note start time, weather, and wind (surveys pause in rain/high wind).
- 2. Wait a settling minute, then run a fixed-duration count (e.g., 5 min) within a fixed radius; record every species seen/heard and the count of each.
- 3. Photograph the habitat and any species you can; note any threatened/target or invasive species.
- 4. Move to the next point along the transect (keep points >=200 m apart) and repeat the count.
- 5. Record total effort (points, duration) and observer.
- 6. Enter the per-point species lists + counts, GPS, weather, effort, and photos into the proof record; sign.
If it does not match the plan
- Threatened/at-risk or target species observed -> flag for the land steward (with location) for protection planning.
- Invasive species dominant / native diversity very low -> flag for a management plan.
- Rain or high wind -> pause/reschedule; counts under poor conditions are not valid.
What counts as done
- 811 locate reference before digging
- Before photo of the bare or lawn-only field-edge margin
- Native species recorded
- Confirmation the entire survey or work stayed on the public road right of way, the county road shoulder, a public park or building, or the resident's own property with consent; that no flooded rice field was entered and no levee was walked on private land; that no standing water was worked in; and that no water or sediment sample was collected from an irrigation canal, turnout, or field tailwater at any level.
- After photo of the planted, watered-in buffer strip
Proof is measured against these, not judged by taste.
Funding this work is a purchase or a vote, same act: you either want this done here, or you want the world to contain it. A vote is free and signed; funding starts at one cent and anything beyond the wage is recorded as a premium for the worker. Either way the money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1785929512343_yf83sfv","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.