Anyone can start here · the public streets and grounds around Wharton County Courthouse, 100 S Fulton St, Wharton, TX 77488
Clear debris from a storm drain grate, site 3, the public streets and grounds around Wharton County Courthouse, 100 S Fulton St, Wharton, TX 77488
Fund it for $95. Proof lands onchain when it's done.
A storm drain grate near Wharton County Courthouse is blocked with grass clippings and trash, backing up surface flow during the next heavy rain.
How this work is done
A documented method, so this packet comes out the same whoever does it. Typically 60–180 minutes. Method of record: Storm drain inlet surface cleaning + minor grate/apron repair per EPA MS4 stormwater BMP maintenance, SURFACE WORK FROM THE CURB ONLY; never enter the drain, never lift beyond the grate; assess→clear/repair→verify
Bring
- heavy work gloves + hi-vis vest + grabber tool and rake
- contractor bags for debris (landscape debris separated from trash)
- camera + measuring tape
- cones for the curb work zone (stay out of the traffic lane)
Steps
- 1. ASSESS: photograph the inlet as found (grate, apron, gutter approach), note blockage type and any damage (broken grate, displaced apron concrete), and record GPS.
- 2. Set cones at the curb work zone; all work is from the sidewalk/curb, never step into the traffic lane and never enter, reach into, or open the drain structure.
- 3. Clear debris, sediment, and litter from the grate surface and the gutter approach with the rake/grabber; bag and dispose of it properly (green waste separated).
- 4. Minor repair within surface scope: re-seat a displaced grate that lifts freely by hand from above, patch apron spalls with cold-patch where the city standard allows; anything more is documented, not attempted.
- 5. VERIFY: photograph the cleared inlet from the same vantage, pour a bucket of clean water at the gutter approach to show flow into the inlet, and report any structural damage to the municipal stormwater line (311/MS4 contact) with photos.
If it does not match the plan
- Anything requiring entry, reaching into the barrel, or lifting a seized grate -> STOP: document and report to the municipality; surface work only.
- Suspected illicit discharge (odor, sheen, off-color flow) -> do not touch; photograph from the curb and report to the MS4 hotline immediately.
- Inlet on a high-speed road with no safe curb work zone -> document from the sidewalk only and report; never work in the traffic lane.
What counts as done
- Before photo of the blocked grate
- Debris type and approximate volume removed recorded
- After photo of the cleared grate with visible flow path
Proof is measured against these, not judged by taste.
Funding this work is a purchase or a vote, same act: you either want this done here, or you want the world to contain it. A vote is free and signed; funding starts at one cent and anything beyond the wage is recorded as a premium for the worker. Either way the money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1785929753349_trbjdzf","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours, and signing costs nothing: no card, no deposit, no fee. An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.