Resurface and clear the perimeter walking-path, segment 2 -- Jesse Owens Park, 9835 S Western Ave, Los Angeles, CA 90047.

This park's perimeter walking path has eroded gravel, root-heaved gaps and overgrown edges narrowing the path where walkers, joggers and wheelchair users all share the same lane. Every segment really does need this -- regrade and clear it one stretch at a time.

Where

Jesse Owens Park, 9835 S Western Ave, Los Angeles, CA 90047 · Open the map

Pay

$480 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

before/after photos + surface-width/grade measurement + vegetation-clearance log + drainage-clear confirm + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-09-18

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• the land manager's work authorization and the trail's design tread width
• hand tools: McLeod or rake, pulaski or mattock, loppers, shovel
• erosion-control matting, staples, and locally specified surfacing or step material
• clinometer or level for outslope and grade
• gloves, eye protection and sturdy footwear
• camera + GPS phone

Steps

1. 1. Photograph the trail segment as found and record what is failing (rutting, a blocked drain, a widened tread, an eroding step or fall line).
2. 2. Confirm the land manager's authorization for this segment and confirm no habitat or seasonal closure applies today.
3. 3. Restore drainage first: clear the existing grade dips and drain outlets so water leaves the tread, because tread repair without drainage fails in one storm.
4. 4. Repair the tread to the design width and to a 3 to 5 percent outslope, filling ruts with compacted mineral soil rather than loose duff.
5. 5. Set matting, check steps or armoring by hand where the grade needs it, staking to the spec and keying the edges into the tread.
6. 6. VERIFY: measure the finished outslope and tread width, and water-test one drain outlet to show water leaves the trail rather than running down it.
7. 7. Photograph the finished segment from the before vantage, log the segment length worked, and enter both in the proof record.

What counts as done

• Before photo of the eroded/narrowed path segment
• After photo showing regraded aggregate surface at full required width
• Vegetation-clearance log (overhanging branches, encroaching shrubs cut back to the path edge)
• Drainage confirmed clear at any cross-culvert or low point along the segment

Proof is measured against these, not judged by taste.