Lockout/tagout observation: equipment servicing, Columbus.

A maintenance crew in Columbus is servicing powered equipment without documented verification that energy-isolating devices are locked/tagged.

Where

Facilities equipment-servicing site, Columbus OH · Open the map

Pay

$532 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

photo of each energy-isolating device's lock/tag + GPS + 1910.147 LOTO checklist + stored-energy + group-lockout status + tiered findings routed to the authorized employee

This is exactly what gets it approved. Nothing settles without it.

Level

advanced

Open until

2026-09-07

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• hard hat + safety glasses + hi-vis vest (site PPE)
• tablet/clipboard with the 29 CFR 1910.147 LOTO checklist
• camera
• the equipment's written energy-control procedure (for reference)
• flashlight

Steps

1. 1. Check in with the authorized employee / competent person; confirm scope, don PPE, and confirm you observe-and-document only, you never operate an energy-isolating device and never apply or remove any lock or tag (only the employee who applied a lock may remove it, per 1910.147).
2. 2. Confirm a written, equipment-specific energy-control procedure exists and identifies every energy source (electrical, mechanical, hydraulic, pneumatic, thermal, gravity/stored) (§1910.147(c)(4)).
3. 3. Photograph each energy-isolating device and confirm it carries the authorized employee's lock and a durable tag with their name, with the device in the safe/isolated position (§1910.147(d)).
4. 4. Confirm stored/residual energy is relieved, disconnected, restrained, or otherwise rendered safe (capacitors, springs, elevated parts, pressure, heat) (§1910.147(d)(5)).
5. 5. For multi-worker servicing, confirm a group-lockout device/box is used so each authorized employee has an individual lock; document the count of workers vs locks (§1910.147(f)(3)).
6. 6. For each finding, mark the condition against the LOTO checklist item, assign a tier (stop-work / correct-before-proceed / monitor), and name the responsible authorized employee / competent person.
7. 7. Enter photos, GPS/address, the checklist, and the tiered findings; sign. Route stop-work items to the authorized employee / competent person with a timestamp, never touch a lock, tag, or energy control.

What counts as done

• Written equipment-specific energy-control procedure confirmed present with all energy sources identified
• Each energy-isolating device photographed with the authorized employee's lock + durable named tag, in the isolated position
• Stored/residual-energy relief and group-lockout coverage documented
• GPS / address confirm
• Tiered findings list with the authorized employee / competent person named + timestamp of stop-work items routed

Proof is measured against these, not judged by taste.