Stabilize the deteriorated lead paint.

The document-only survey on the 1200 block of Oaklawn Avenue found deteriorating paint on the window sills and porch floor within a child's reach; an EPA Lead-Safe Certified renovator now stabilizes it under full RRP wet-method containment.

Where

the 1200 block of Oaklawn Avenue, Washington Heights, West Charlotte, Charlotte, NC 28216 · Open the map

Pay

$780 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

containment setup photo + wet-method work photos + clearance test result + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

advanced

Open until

2026-09-30

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• EPA Lead-Safe Certified firm credentials + RRP-compliant containment sheeting
• wet-sanding/wet-scraping tools (no dry sanding/scraping, no open-flame burning)
• HEPA vacuum + HEPA-filtered respirator/PPE per the RRP work-practice standards
• post-work clearance dust-wipe test kit

Steps

1. 1. ASSESS: confirm the certified-firm/renovator credential and the pre-work lead-hazard-document-survey findings (which surfaces, which planned disturbance); set up RRP-compliant containment (plastic sheeting, warning signs, occupant/child exclusion from the work area) before any disturbance.
2. 2. Stabilize the deteriorated paint using RRP-compliant wet methods only (wet scraping/wet sanding, or a HEPA-shrouded tool), never dry sanding, dry scraping or open-flame burning.
3. 3. Prime and finish-coat the stabilized surface with the agreed paint/finish; keep containment in place until cleanup is complete.
4. 4. Perform RRP cleanup: HEPA-vacuum all surfaces and the containment area, wet-wipe, and verify with the post-work cleaning verification / clearance dust-wipe method.
5. 5. Remove containment only after clearance passes; photograph the finished surface and file the RRP compliance record (firm certification, work practices used, cleanup verification) with the household.

What counts as done

• Photo of RRP-compliant containment set up before disturbance
• Photos of wet-method stabilization work in progress (no dry sanding/scraping)
• Post-work HEPA-vacuum cleanup + clearance/cleaning verification result

Proof is measured against these, not judged by taste.