intermediate work · Elmendorf Lake Park, San Antonio, TX

Install a ground-mounted shade structure.

Fund it for $780. Proof lands onchain when it's done.

$780 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Vote for it · free Pledge backing · free Fund this work · $780

Open, but not claimable yet. restricted: permit-required — Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.

What the work involves

Install a ground-mounted shade sail over an open gathering area at Elmendorf Lake Park. Elmendorf Lake anchors a dense West Side neighborhood where shade and cool water are scarce in July and August. A cool, shaded place to sit lowers surface and air temperatures for families and elders during triple-digit afternoons.

Where: Elmendorf Lake Park, San Antonio, TX · Open the map
Pay: $780 proposed
This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: 811 locate confirm + before/after photos + anchor-torque/footing photo + fabric-tension check + GPS
This is exactly what gets it approved. Nothing settles without it.
Level: intermediate
Open until: 2026-09-30
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

camera + infrared/surface thermometer
push broom + pressure washer (surface prep)
roller/squeegee applicators for cool-pavement coating (manufacturer-specified system only)
cones/barricades for the work-zone perimeter
post-hole digger or core drill + concrete anchors (shade-structure footings)
tape measure + level
gloves + safety glasses + respirator as coating manufacturer specifies

Steps

1. Photograph the target surface or waiting area as found, including a mid-day surface-temperature reading, and confirm the right-of-way permit and any utility locates before ground disturbance.
2. Set cones/barricades for a pedestrian-safe work zone; pressure-wash and clear the surface of debris, or confirm the shade-structure footing location clears underground utilities (811 locate) and meets the manufacturer's anchor spec.
3. Apply the cool-pavement coating system per manufacturer instructions in the specified number of coats and cure time, OR set and anchor the shade structure/sail per its engineering spec, keeping clearances for accessible passage.
4. Verify: for coatings, confirm even coverage with no missed sections and let the full cure window pass before reopening to traffic; for structures, confirm anchor torque and structural stability by hand-test.
5. Take a matching-vantage after photo and a same-conditions surface-temperature reading; log the reading delta.
6. Enter before/after photos, the temperature readings, materials/product used, and the permit reference into the proof record; sign.

What counts as done

Before photo of the bare, unshaded plaza area
811 locate reference before any footing/anchor work
After photo of the installed structure with posts plumb and fabric taut, no sag or flap points
Anchor/footing photo confirming a secure, code-matched installation

Proof is measured against these, not judged by taste.

The money and the proof

What is promised, and what is not.

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1788204853532_melc78s","funderWallet":"0xYOU"}.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.