Paint a native-habitat mural and set planter boxes.

This corridor's service alley runs bare, tagged concrete block walls with no color, no planting, and no reason for anyone to feel safe walking through -- painting a native-habitat mural on the wall and setting anchored planter boxes along the alley floor turns a dead, blighted cut-through into a cared-for public space.

Where

the Tulare Street corridor, Downtown Fresno, CA 93721 · Open the map

Pay

$660 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

before/after photos + low-VOC paint spec + planter-box anchor check + drainage confirm + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-10-16

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• written owner or manager consent for the specific wall, plus any mural or sign permit the city requires
• the approved design at scale, plus chalk, projector or grid for the layout
• exterior-grade primer and paint rated for the substrate, and an anti-graffiti clear coat
• brushes, rollers, extension poles, drop cloths and painter's tape
• wall-washing gear and a patching compound for spalled or flaking areas
• eye protection, gloves and a respirator suited to the coating
• camera + GPS phone

Steps

1. 1. Photograph the wall as found, wide then close, and record the substrate and its condition.
2. 2. Confirm the written owner consent and any city mural permit for this exact wall and this exact design before a brush is opened.
3. 3. Prepare the wall: wash, let dry, patch spalled or flaking areas, and prime the whole field with the primer the paint system calls for.
4. 4. Lay out the design at scale and photograph the layout so the finished mural can be checked against what was consented to.
5. 5. Paint the design in the system's coat sequence, staying inside the product's temperature and humidity window, and protect the sidewalk with drop cloths throughout.
6. 6. Apply the anti-graffiti clear coat once the paint has fully cured, and log the product used so a future cleaning does not destroy the mural.
7. 7. Photograph the finished mural from the before vantage and enter the consent reference, the products used and the photos in the proof record.

What counts as done

• Before photo of the bare/tagged alley wall and floor
• Low-VOC, graffiti-resistant paint product spec
• After photo of the completed mural + installed planter boxes
• Planter-box anchor/stability check + drainage confirm (no standing water after a full soak)

Proof is measured against these, not judged by taste.