Inspect the stormwater path.

Acres of panel turn a diffuse rain into concentrated drip lines, and a carport array turns a parking lot into one fast sheet. Walk the drainage path at the edge of OUC community solar at the Stanton Energy Center within 48 hours of a storm: where the water leaves, what it carries, whether the swale or basin holds and drains, and whether the drip line under the row edge has cut a rill. flatwoods sand and mowed grass between the rows, with afternoon storm runoff crossing it. Report what you can see and measure, and route anything structural to Orlando Utilities Commission and the local stormwater authority.

Where

public roads near Alafaya Trail and the Econlockhatchee corridor, Orange County, FL · Open the map

Pay

$80 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

post-storm timing + GPS along the flow path + photos of inlet, swale or basin and any rill + standing-water depth and drawdown + routing note

This is exactly what gets it approved. Nothing settles without it.

Level

entry

Open until

2026-12-01

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• measuring tape
• GPS phone
• camera
• trowel / probe
• data sheet
• gloves

Steps

1. 1. Locate the GI asset; record GPS; identify the type (rain garden / bioswale / permeable pavement / tree filter).
2. 2. Photograph the asset, its inlet, and its outlet/overflow.
3. 3. Check the inlet and outlet for blockage (sediment, trash, mulch) and note whether flow can enter/leave freely.
4. 4. Check for standing water and estimate whether it drains within the design window (typically <24-48h after rain); probe media if dry.
5. 5. Assess vegetation/media condition and estimate sediment/trash accumulation depth.
6. 6. Note erosion, bypass, or structural damage and list the maintenance needed.
7. 7. Enter asset type, condition, inlet/outlet status, drainage observation, sediment level, maintenance needs, GPS, photos; sign.

What counts as done

• The storm date and rainfall from a named source, and the date and time of the walk within 48 hours of it
• GPS waypoints and photos along the flow path from the array edge to where the water leaves the site
• Any rill, scour or sediment plume measured and photographed with a scale object, including under the row drip line
• Standing water depth and whether it drew down within the local standard, with the finding routed to the site owner and the stormwater authority

Proof is measured against these, not judged by taste.

The standard this serves

Green Stormwater Infrastructure. Green stormwater infrastructure is the city's way of handling rain the way a meadow does: rain gardens, planted swales, and permeable pavement that let a storm soak in instead of surging down a pipe. The EPA's inspection standard keeps these systems honest, because a neglected rain garden quietly stops working while still looking like a garden. Mastery is the inspector's eye: reading inlets, overflow, plants, and soil in a single practiced pass. This packet is one such inspection, one basin checked and one record filed, which is precisely how a thousand basins stay alive.