Run a ground-level module cleaning on OUC community solar.

The soiling measurement said the glass is costing this array real output. Clean it the way the manufacturers ask: low-mineral or deionized water and a soft brush on a pole, from the ground, on ground-mount or carport rows only, with Orlando Utilities Commission giving written permission first. flatwoods sand and mowed grass between the rows, with afternoon storm runoff crossing it. The seven days of production before and after become the receipt, so the community can see what the work was worth instead of taking anyone's word for it.

Where

public roads near Alafaya Trail and the Econlockhatchee corridor, Orange County, FL · Open the map

Pay

$140 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash — recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

written owner permission + before/after photos from one fixed spot + seven days production either side + computed soiling ratio

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-12-01

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

• camera with a date stamp and a GPS phone
• soft-bristle brush on an extension pole rated for glass
• deionized or low-mineral water with a hand pump or hose
• microfiber cloths and clean buckets
• hi-vis vest and gloves
• the array's public production record for the seven days either side

Steps

1. 1. Confirm in writing that the array is ground-mount or carport, that the owner permits the cleaning, and that every module in scope is reachable from the ground. If any part needs a ladder or a roof, stop and record why.
2. 2. Photograph the module surfaces before touching anything, from a fixed spot you can return to, and record the date, the time and the days since the last measurable rain from a named weather source.
3. 3. Record the seven days of production before the cleaning from the public dashboard or the owner's meter, with the source named.
4. 4. Clean the glass with low-mineral or deionized water and a soft brush only, working from the ground. Never stand or lean on a module, never walk on a tracker, and never open, touch or switch any enclosure, connector, conduit or switch. No detergent, no solvent, no pressure washer.
5. 5. Photograph the same modules from the same fixed spot after the cleaning, with the date and time.
6. 6. Record the seven days of production after the cleaning, compute the soiling ratio from the two windows at comparable irradiance, and publish both photo sets, both windows and the ratio.

What counts as done

• The owner's written permission naming the rows cleaned and the date
• Before and after photos of the same modules from the same fixed spot, with GPS and timestamps
• Seven days of production before and seven days after, from the dashboard or the owner's meter, with the source named
• The soiling ratio computed from those two windows, with the irradiance comparison stated and any damaged module reported to the owner instead of cleaned

Proof is measured against these, not judged by taste.