a resident's own home, near the town center, Brady, TX 76825 (McCulloch County; best-estimate location near the town center, exact address not confirmed)
Seal the attic hatch and top-plate gaps, a resident's own home.
The attic hatch perimeter and visible top-plate penetrations at a resident's own home in Brady, TX leak conditioned air, driving up cooling Read all of it
Not funded yet. Settles as earned credit, $90 proposed.
Proof it takes, the deadline, the level
- Proofpermission record + before/after photos per location + continuous-bead confirm + hatch-latch confirm + GPS
- Open until2026-10-13
- Levelentry
All of it: the words, the place, the proof
The attic hatch perimeter and visible top-plate penetrations at a resident's own home in Brady, TX leak conditioned air, driving up cooling costs through the Hill Country's hot summers.
Fund it for $90. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Confirm with the resident which areas are in scope, then act.
- 2. Identify accessible envelope bypass points reachable from inside on a stepladder (attic hatch/scuttle-hole perimeter, top-plate penetrations, plumbing/electrical chases visible from a hallway or closet ceiling), never entering the attic crawlspace itself.
- 3. Photograph each bypass point before sealing, then apply caulk or foam sealant to close each accessible gap, never disturbing insulation or entering the attic.
- 4. Photograph the finished seal at each location from the matching before vantage and confirm the hatch/scuttle-hole still closes and latches.
What counts as done
- Written or recorded permission from the resident
- Before and after photos of each sealed bypass point
- Continuous caulk or foam bead confirmed at each accessible gap
- Attic hatch or scuttle-hole confirmed still closes and latches after sealing
Proof is measured against these, not judged by taste.
The standard this serves
DIY Weatherization and Air Sealing. Air sealing is the cheapest energy work there is, and the Department of Energy has spent decades proving it: a tube of caulk and a roll of weatherstrip, placed where the cold actually comes in, beat almost any gadget you can buy. This standard keeps the work occupant-safe: no wiring, no combustion equipment, no disturbing old paint. Mastery looks like hands that can find a draft with a bare palm and close it for good. This packet is one home's worth of that: find the gaps, seal them, photograph the proof.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789314554174_cjuxy1x","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789314554174_cjuxy1x