Mcclymonds High School West
Install the EV charger.
Install the EV charger in Oakland, CA. Read all of it
Not funded yet. Settles as earned credit, $800 proposed.
Proof it takes, the deadline, the level
- ProofLoad calculation + permit references + Torque log + labeled breaker photo + Electrical inspection pass reference + Charge-session photo/log
- Open until2026-10-29
- Leveladvanced
All of it: the words, the place, the proof
Install the EV charger in Oakland, CA. This packet does not assert a surveyed condition beyond that. The proof requirements listed on this packet are what counts as done.
Fund it for $800. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- UL-listed Level-2 EVSE + mounting hardware
- conductors/conduit, breaker and GFCI protection per NEC 625 plan
- multimeter/clamp meter + torque screwdriver (licensed electrician)
- load calculation worksheet + permit
Steps
- 1. ASSESS: run/verify the service load calculation for the new circuit, confirm panel capacity and the run path, and photograph the panel schedule and install location before work.
- 2. Install the branch circuit (conduit, conductors, breaker) sized per the EVSE nameplate and NEC 625; torque terminations to spec.
- 3. Mount and wire the EVSE at the required height/location (clear of the parking envelope, cable management per listing) and label the circuit.
- 4. Commission: verify voltage, GFCI/CCID function, and a full charge session on a vehicle or tester; register the unit if networked.
- 5. VERIFY: pass the electrical inspection; photograph the completed installation, breaker, and label; record the charge-session proof and leave the owner the operating info.
What counts as done
- Load calculation + permit references
- Torque log + labeled breaker photo
- Electrical inspection pass reference
- Charge-session photo/log
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789356296068_ssicpc7","funderWallet":"0xYOU"}.
Open, but not claimable yet. restricted: permit-required, regulated — Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789356296068_ssicpc7