Sa Olg
Top up the attic insulation.
The attic at a community building in San Antonio, TX is under-insulated, letting heat escape in winter and build up in summer. Read all of it
Not funded yet. Settles as earned credit, $400 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after depth-gauge photos + material R-value note + GPS
- Open until2026-10-29
- Levelentry
All of it: the words, the place, the proof
The attic at a community building in San Antonio, TX is under-insulated, letting heat escape in winter and build up in summer. Adding insulation to depth cuts the load year-round.
Fund it for $400. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- caulk gun + backer rod
- low-expansion spray-foam sealant (fire-rated where required)
- storm window/door kit or rigid-foam rim-joist batts
- heat-tape + pipe-insulation sleeves (freeze-protection runs)
- camera
- tape measure + utility knife
Steps
- 1. Confirm the scope with the occupant/facility manager against the readiness survey's ranked target list (or a fresh walk if none exists); photograph the untreated bypass, window, rim-joist run or pipe run.
- 2. Prep the surface: clean and dry the substrate, remove failed old caulk or weatherstripping, and clear any debris blocking the install.
- 3. Install the sealing/insulation material to the target's spec -- storm window/door, spray-foam bypass seal, rim-joist rigid-foam batt, or heat-tape plus pipe-insulation sleeve -- per manufacturer instructions.
- 4. Verify the result (smoke-pencil/hand check for bypass work, fit-and-lock check for storm windows/doors, continuous-coverage check for rim-joist or pipe insulation) and photograph the finished install from the same vantage.
- 5. Note any combustion-safety or moisture flag surfaced during the install and route it to a BPI-qualified pro before continuing to the next target.
What counts as done
- Before photo with depth gauge showing existing insulation level
- After photo with depth gauge showing insulation topped to code depth
- Material and R-value note + bags/rolls used count
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789358039089_y19qa3f","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789358039089_y19qa3f