the high school athletic complex's irrigation controller, Devine, TX 78016 (Medina County); best-estimate location near the town center, exact address not confirmed
Install a soil-moisture sensor and set its cutoff threshold, the high school athletic complex's irrigation controller, Devine, TX 78016 (Medina County).
The high school athletic complex's irrigation controller runs on the clock alone, so a rain earlier in the week does nothing to Read all of it
Not funded yet. Settles as earned credit, $160 proposed.
Proof it takes, the deadline, the level
- Proofthreshold value recorded + wet-test withhold + dry-test run + burial-depth photo + GPS
- Open until2026-10-20
- Levelintermediate
All of it: the words, the place, the proof
The high school athletic complex's irrigation controller runs on the clock alone, so a rain earlier in the week does nothing to stop the next scheduled cycle -- there is no sensor in the ground to tell the controller the root zone is already wet.
Fund it for $160. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Power the controller off at the disconnect, then install the soil-moisture probe in the root zone of the driest-tending part of the zone it will govern, per the manufacturer's burial-depth spec.
- 2. Wire the sensor into the controller's dedicated moisture-sensor input terminal, restore power, and confirm the controller recognizes the sensor as connected.
- 3. Set the cutoff threshold to the manufacturer/soil-type recommended value, then run the wet test: saturate the sensor by hand-watering the probe and confirm the controller withholds the next scheduled cycle.
- 4. Run the dry test: let the probe read normally and confirm the controller runs the zone on schedule once moisture reads below the threshold, then record both readings.
What counts as done
- Threshold value set, recorded against the manufacturer/soil-type reference
- Wet test: photo/reading of the saturated sensor and the controller withholding the scheduled cycle
- Dry test: photo/reading of the sensor below threshold and the controller running the zone on schedule
- Sensor burial-depth and siting photo in the governed zone's root area
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789886617934_zh794nu","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789886617934_zh794nu