the senior center's common room thermostat, Yorktown, TX 78164 (DeWitt County); best-estimate location near the town center, exact address not confirmed
Release a thermostat stuck.
The senior center's common room thermostat still carries a stored schedule program, but someone pressed Hold weeks ago and the unit has Read all of it
Not funded yet. Settles as earned credit, $80 proposed.
Proof it takes, the deadline, the level
- Proofbefore hold-state photo + stored-schedule confirm + after schedule-mode photo + transition bench-test + GPS
- Open until2026-10-20
- Levelentry
All of it: the words, the place, the proof
The senior center's common room thermostat still carries a stored schedule program, but someone pressed Hold weeks ago and the unit has run one flat setpoint around the clock ever since -- the schedule is intact but it never engages because the override sits on top of it.
Fund it for $80. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Read and record the thermostat's current display exactly as found, noting the Hold/Permanent indicator and the flat setpoint it is running.
- 2. Confirm the stored schedule program is still intact by stepping through the schedule menu without changing it.
- 3. Release the Hold/Permanent override back to Schedule/Run mode on the thermostat's own menu.
- 4. Record the display now reading schedule mode, then bench-test the next scheduled transition and record the setpoint changing at the programmed time.
What counts as done
- Before photo of the display showing the Hold/Permanent indicator and its flat setpoint
- Confirmation the stored schedule was intact before release (photo of the schedule menu)
- After photo of the display reading schedule/run mode, hold released
- Bench-test record of the setpoint changing on the display at the next programmed transition
Proof is measured against these, not judged by taste.
The standard this serves
Energy Efficiency Audit. Energy efficiency work begins with the walkthrough audit, the kind the ASHRAE standard describes: a trained eye moving through a building, reading the bills, the walls, the lights, and the equipment, and coming out with the short list of fixes worth doing first. Mastery looks like an auditor who can feel where a building is bleeding money within the hour, and prove it on paper. That instinct is trained by repetition on real buildings. This packet is one repetition: one system observed, one reading taken, one finding recorded the way the standard asks.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789886757920_sstygj1","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789886757920_sstygj1