← Board

a renter's apartment near the 1400 block of University Drive, Denton, TX 76201 (Denton County); renter-occupied unit, best-estimate location near the town center, exact address not confirmed

Swap in low-flow aerators and a showerhead, keep the originals to hand back.

A renter's kitchen and bathroom fixtures run at the builder-grade flow rate because nobody wants to make a plumbing change they can't Read all of it

Not funded yet. Settles as earned credit, $80 proposed.

Claim this job

Proof it takes, the deadline, the level
  • Proofbefore flow-rate reading per fixture + labeled original-fixture reclaim-bag photo + installed WaterSense-fixture photo + after flow-rate reading + GPS
  • Open until2026-10-20
  • Levelentry
All of it: the words, the place, the proof

A renter's kitchen and bathroom fixtures run at the builder-grade flow rate because nobody wants to make a plumbing change they can't undo when the lease ends -- but a WaterSense aerator and showerhead thread on and off the exact same way the originals did, so the swap costs nothing at move-out.

Fund it for $80. Proof lands onchain when it's done.

Where
a renter's apartment near the 1400 block of University Drive, Denton, TX 76201 (Denton County); renter-occupied unit, best-estimate location near the town center, exact address not confirmed. Open the map
Pay
$80 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof
before flow-rate reading per fixture + labeled original-fixture reclaim-bag photo + installed WaterSense-fixture photo + after flow-rate reading + GPS

This is exactly what gets it approved. Nothing settles without it.

Level
entry: anyone can start here
Open until
2026-10-20
Posted by
0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

How this work is done

A documented method, so this packet comes out the same whoever does it.

Steps

  1. 1. Record the make and thread size of each fixture, and take a labeled photo of every original kitchen/bath aerator and the showerhead before removing anything.
  2. 2. Hand-unscrew each faucet aerator and the showerhead from the shower arm, wrapping channel-lock pliers in a cloth if a fixture is stuck; use no tool or method that mars the finish or cuts into the supply line.
  3. 3. Measure and record the flow rate of each original fixture with a stopwatch and a marked measuring container before threading on any replacement.
  4. 4. Thread on the WaterSense-labeled aerators and showerhead hand-tight, then snug a quarter turn with the cloth-wrapped pliers; do not overtighten past a snug seal.
  5. 5. Bag and label each original fixture by location (kitchen, bath 1, bath 2, shower) and store the bag where the resident keeps their own move-out items, so the exact original threads back on when the lease ends.
  6. 6. Re-measure the flow rate of each installed fixture and photograph the labeled reclaim bag next to the newly installed fixture.

What counts as done

  • Before flow-rate reading (gpm) per fixture with the original still installed
  • Photo of each original fixture, labeled by location, bagged for move-out reinstall
  • Photo of each installed WaterSense-labeled aerator/showerhead
  • After flow-rate reading confirming the reduction
  • Confirmation that no plumbing was cut, soldered, or permanently altered -- every fixture threads on and off by hand

Proof is measured against these, not judged by taste.

The standard this serves

Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789886948703_s0ls2z5","funderWallet":"0xYOU"}.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund
Vote for it, free Pledge backing, free Fund this work, $80

Packet WORK_1789886948703_s0ls2z5