a resident's own home near the town center, San Angelo, TX 76903 (Tom Green County); best-estimate location, exact address not confirmed; a home with a tile-to-carpet transition between a hallway and a bedroom
Install a beveled reducer strip.
The hallway-to-bedroom transition in this home has a raised tile lip that catches a wheelchair caster every time the resident crosses it. Read all of it
Not funded yet. Settles as earned credit, $130 proposed.
Proof it takes, the deadline, the level
- Proofbefore height-gap measurement + after installed-strip photo + wheel pass-through confirmation both directions + GPS
- Open until2026-10-20
- Levelentry
All of it: the words, the place, the proof
The hallway-to-bedroom transition in this home has a raised tile lip that catches a wheelchair caster every time the resident crosses it. A beveled threshold reducer strip closes the height gap so a wheel rolls over it instead of stopping on it.
Fund it for $130. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Measure the height gap at the flooring transition and confirm the wheel of the resident's walker or wheelchair catches on it.
- 2. Cut the beveled reducer strip to the width of the doorway or opening at the transition.
- 3. Fasten or adhere the reducer strip flush across the gap so its bevel runs from the lower floor surface up to the higher one.
- 4. Roll the walker or wheelchair wheel across the transition in both directions to confirm it no longer catches.
- 5. Photograph the before gap and the after reducer strip from the same vantage.
What counts as done
- Before measurement of the height gap at the flooring transition
- After photo of the installed reducer strip from the same vantage as the before photo
- Confirmation the walker or wheelchair wheel rolls over the transition in both directions without catching
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789887108111_xm73y73","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789887108111_xm73y73