a resident's own home near the town center, Livingston, TX 77351 (Polk County); best-estimate location, exact address not confirmed; a home with a stairway whose dark tread edges have no contrast marking
Install non-slip, high-contrast stair tread nosing, a resident's own home near Livingston, TX.
The porch and interior stair treads at this home are a single dark wood tone with no edge marking, so the resident Read all of it
Not funded yet. Settles as earned credit, $160 proposed.
Proof it takes, the deadline, the level
- Proofbefore photo of unmarked tread edges + after photo of installed nosing strips + adhesion check per step + GPS
- Open until2026-10-20
- Levelentry
All of it: the words, the place, the proof
The porch and interior stair treads at this home are a single dark wood tone with no edge marking, so the resident cannot see where one step ends and the next begins in low evening light. High-contrast, non-slip nosing strips mark and grip every edge.
Fund it for $160. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Walk the stairway with the resident and confirm the tread edges have no traction strip and blend visually with the tread surface.
- 2. Clean and dry each tread edge so the adhesive-backed nosing strip will bond.
- 3. Cut each nosing strip to the width of its tread and press it flush along the leading edge, working step by step.
- 4. Press-roll each strip firmly its full length to seat the adhesive, checking that no edge lifts.
- 5. Walk the full stairway with the resident to confirm every strip holds underfoot, then photograph the completed run.
What counts as done
- Before photo of the stair treads with no traction strip or contrast marking
- After photo of the installed high-contrast, non-slip nosing on every tread
- Confirmation each strip is seated and does not lift at the edge
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789887125777_6cppqd4","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789887125777_6cppqd4