a resident's own home near the town center, Georgetown, TX 78626 (Williamson County); best-estimate location, exact address not confirmed; a home with a long driveway-to-door or yard-to-door walking route
Install a fixed rest-point bench along a resident's own home route, a resident's own home near Georgetown, TX.
The walk from this home's driveway to the front door has no place to stop, so the resident either makes the whole Read all of it
Not funded yet. Settles as earned credit, $260 proposed.
Proof it takes, the deadline, the level
- Proofbefore photo of the route with no rest point + anchor confirmation + after photo of the installed bench + load-test confirmation + GPS
- Open until2026-10-20
- Levelintermediate
All of it: the words, the place, the proof
The walk from this home's driveway to the front door has no place to stop, so the resident either makes the whole distance in one push or turns back. A fixed, wall-anchored or ground-anchored bench partway along the route gives a place to sit down and continue.
Fund it for $260. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Walk the route with the resident and mark the point where the distance or grade makes them slow down or want to stop.
- 2. Confirm the bench site is level ground or a wall section that can take an anchored fixed bench, not a loose or portable seat.
- 3. Anchor the bench frame into the ground with post anchors or into the wall studs/masonry, per the site.
- 4. Set and level the seat, then torque every anchor fastener to a firm, non-moving hold.
- 5. Load-test the bench with the resident sitting and rising from it, then photograph the finished rest point along the route.
What counts as done
- Before photo of the route showing no place to stop partway along it
- Photo confirming the bench is anchored into the ground or into masonry/studs, not freestanding or loose
- After photo of the installed bench in place along the route
- Load-test confirmation of the resident sitting and rising from the bench
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1789887134461_yvzsc9g","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1789887134461_yvzsc9g