On-site at the septic system / Minneapolis-St. Paul, MN
Septic system stewardship audit (records + surface signs + maintenance schedule) — Minneapolis-St. Paul, MN.
An auditor stretches a tape measure from the drainfield edge to the nearest tree at On-site at the septic system / Minneapolis-St Paul, then photographs pooling water and bright-green grass over the drainfield with a phone. Read all of it
Not funded yet. Settles as earned credit, $165 proposed.
Proof it takes, the deadline, the level
- ProofSystem records located, or absence documented + Tank, drainfield surface walked for pooling, odor, lush patches + Drainfield protection checked: no parking, tree setback, drains diverted + Inspection, pump-out dates compared to EPA's schedule + Overdue items routed to a licensed professional or health department + Tank never opened, entered, or probed
- Open until2026-12-24
- Levelskilled
All of it: the words, the place, the proof
Document a Minneapolis-area septic system's records, surface signs, and maintenance schedule against EPA guidance. The University of Minnesota's own Onsite Sewage Treatment Program, a nationally recognized research and education program for this exact system type, is based here. The septic system's records, surface signs and pump-out schedule have not been checked, so a failing tank or drainfield can go unnoticed.
Offer to pay $165. The receipt lands onchain once the proof is approved.
Safety, read before you claim
This is a records and surface-sign audit only; it never opens or enters the tank. Septic-tank gases can be fatal, so any pumping, entry, or repair is licensed-professional work only.
The full safety list for this job:
- Never open, enter, or reach into a septic tank or its access ports for any reason -- toxic-gas and confined-space entry into septic/sewage tanks has killed workers and family rescuers alike; call a licensed septic professional for anything involving the tank interior.
- OSHA: hydrogen sulfide at 300 ppm or more can cause unconsciousness, respiratory failure, and sudden death; NIOSH Publication No. 86-110 ('Preventing Occupational Fatalities in Confined Spaces') found roughly 60 percent of confined-space fatalities involve a would-be rescuer going in after the first victim.
- A confirmed sewage backup, standing sewage, or strong sewage odor indoors or over the drainfield routes to a licensed septic professional now, and to the local health department if it may be affecting a neighboring property or shared water source.
- This audit does not certify the system is working; a due or overdue professional inspection is the only way to confirm tank condition, sludge/scum levels, and drainfield function.
- Remediation, repair, and replacement labor stay with the ecological library's water lane and licensed contractors -- this standard is self-stewardship documentation only.
- This packet is independent of and not affiliated with the University of Minnesota or its Onsite Sewage Treatment Program: named as the real, verified home of a nationally recognized research and education program for this exact system type, not an endorsement or partnership.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- Camera or phone for photographing the tank lid area, drainfield surface, and any records found
- Flashlight for reading permit/as-built paperwork and any visible riser/lid markings
- Tape measure for drainfield setback distances (trees, structures, wells)
- A copy of the household's septic permit or as-built diagram, if one exists, or the county/health-department parcel record if not
- Notepad or phone notes app for the inspection/pump-out date log
Steps
- 1. Locate the system's records: permit, as-built diagram, and the date of the last professional inspection and the last pump-out. If none exist on-site, check with the local health department, which typically holds septic permit records.
- 2. Walk the tank lid area and the full drainfield, photographing any pooling water, unusually lush or bright-green grass, sunken ground, or sewage odor -- each is a documented warning sign of a failing system.
- 3. Check drainfield protection: confirm nothing is or has been parked or driven on it, that any trees are planted at an appropriate distance from it, and that roof drains, sump pumps, and other rainwater drainage are diverted away from it (excess water slows or stops the wastewater treatment process).
- 4. Compare the last-inspection and last-pump-out dates against EPA's own schedule: professional inspection at least every 3 years, pumping every 3 to 5 years for a conventional tank, or about annually for an alternative/mechanical system. Flag as overdue if either date is missing, unknown, or past that window.
- 5. Note household habits relevant to system load: whether cooking grease, wipes, or household chemicals are ever flushed or drained, and whether laundry loads are spread across the week rather than run back-to-back.
- 6. Record every finding against the checklist, and route it by name: a licensed septic service professional for any warning sign or an overdue inspection/pump-out, or the local health department for missing permit/system records. Never open, enter, or probe inside the tank at any point in this method.
What counts as done
- System records located (as-built diagram or permit, last inspection date, last pump-out date) or their absence explicitly documented
- Surface of the tank and drainfield walked and photographed for pooling water, unusually lush or bright-green patches, or sewage odor
- Drainfield protection checked against EPA guidance: nothing parked or driven on it, trees planted at an appropriate setback, and roof drains/sump pumps diverted away from it
- Inspection and pump-out due dates compared to EPA's own schedule (professional inspection at least every 3 years; pumping every 3 to 5 years, or about annually for alternative/mechanical systems) and flagged if overdue or unknown
- Every warning sign or overdue item routed by name: a licensed septic service professional for inspection, pumping, or repair, or the local health department for permit/system records
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.
Open, but not claimable yet. restricted: permit-required. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790316048546_1eatm9h