← Board

206 E San Saba Ave, Menard, TX 76859

Retrofit missing detectable-warning domes onto a curb ramp near Menard County Courthouse, Menard, TX.

A licensed crew in hi-vis wet-cuts anchor holes in the concrete curb ramp at 206 E San Saba Ave, then anchors a detectable warning dome panel flush and level at its base. Read all of it

Not funded yet. Settles as earned credit, $210 proposed.

Proof it takes, the deadline, the level
  • Proofbefore/after photos + dome-panel spec sheet + anchor-set photo + GPS
  • Open until2026-11-12
  • Leveladvanced
All of it: the words, the place, the proof

Retrofit missing detectable-warning domes onto a curb ramp near Menard County Courthouse, Menard, TX. A curb ramp near Menard County Courthouse is structurally sound but was never fitted with the ADA PROWAG-required detectable-warning dome surface, leaving no tactile cue for a visually-impaired pedestrian at the street edge.

Offer to pay $210. The receipt lands onchain once the proof is approved.

What it looks like
A licensed crew in hi-vis wet-cuts anchor holes in the concrete curb ramp at 206 E San Saba Ave, then anchors a detectable warning dome panel flush and level at its base.

A description of this kind of work, not a record that it happened here.

Where
206 E San Saba Ave, Menard, TX 76859. Open the map
Pay
$210 proposed

This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof
before/after photos + dome-panel spec sheet + anchor-set photo + GPS

This is exactly what gets it approved. Nothing settles without it.

Level
advanced
Open until
2026-11-12
Posted by
0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

Safety, read before you claim

Licensed concrete/ADA-retrofit crew only; wet-cut anchor holes to control dust; cones/hi-vis during install and cure time. Wear eye protection and hearing protection; get flagger training and an approved traffic control plan before any work in the roadway.

How this work is done

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

  • a water-fed rotary hammer to wet-cut the anchor holes, a hammer to drive the anchors and a level to set the panel

Steps

  1. Photograph the curb ramp this job names, showing it has no detectable-warning surface.
  2. Select the PROWAG-compliant detectable-warning panel sized to the ramp and record its spec sheet or photo.
  3. Mark and wet-cut the anchor holes at the ramp's base to control dust.
  4. Set the panel flush and level at the ramp's base and drive the anchors home.
  5. Photograph the panel anchored flush and level at the ramp's base.
  6. Post cones and hi-vis around the ramp through the cure time.
  7. Photograph the finished, anchored dome surface from the same vantage as the before photo.

What counts as done

  • Before photo of the ramp with no detectable-warning surface
  • Spec sheet/photo of the PROWAG-compliant detectable-warning panel used
  • Photo of the panel anchored flush and level at the ramp's base
  • After photo of the finished, anchored dome surface

Proof is measured against these, not judged by taste.

The standard this serves

Civic Safety Reporting. Civic safety is the craft of noticing for your neighbors: the burned-out light over a dark corner, the sidewalk lip waiting to trip someone, the overgrown hedge hiding a crosswalk. This standard is documentation and coordination only, no repairs: see the hazard clearly, grade how serious it is, record it with a photo and a place, and route it to the people with the authority to fix it. Mastery looks like a neighborhood where problems are found while they are still small. This packet is one clear-eyed report, and one clear report is how every fix begins.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.

Open, but not claimable yet. restricted: permit-required. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Packet WORK_1790565365003_7pn2d7h