a resident's own home, near the town center, Liberty, TX 77575 (Liberty County; best-estimate location, exact address not confirmed)
Seal the doors and windows against extreme heat and cold.
Seal the doors and windows against extreme heat and cold at a resident's own home, Liberty, TX. Read all of it
Not funded yet. Settles as earned credit, $95 proposed.
Proof it takes, the deadline, the level
- Proofresident permission record plus before/after photos plus compression/fit confirm
- Open until2026-11-12
- Levelentry
All of it: the words, the place, the proof
Seal the doors and windows against extreme heat and cold at a resident's own home, Liberty, TX. This home's exterior door and window weatherstripping near Liberty, TX is worn thin, and the seasonal swing from extreme summer heat to hard winter cold pushes conditioned air straight out through the gap all year round.
Fund it for $95. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Walk the resident's own home with the resident and inspect each exterior door and window for worn weatherstripping or a gapping door sweep that lets conditioned air escape; photograph each before treatment.
- 2. Remove old, failed weatherstripping and clean the frame surface.
- 3. Install new weatherstripping and a door sweep fitted flush to the threshold at each treated opening.
- 4. Test each treated opening for compression, fit, and a clean close/latch, and photograph the finished install from the matching before vantage.
What counts as done
- Written or recorded permission from the resident
- Before and after photos of each treated door/window
- Confirmation that weatherstripping compresses evenly without binding the sash/door
- Door sweep fitted flush to the threshold with no daylight gap
- Every treated opening still closes and latches after installation
- Site record: the exact site's name and street address, and the contact who agreed to the work
Proof is measured against these, not judged by taste.
The standard this serves
DIY Weatherization and Air Sealing. Air sealing is the cheapest energy work there is, and the Department of Energy has spent decades proving it: a tube of caulk and a roll of weatherstrip, placed where the cold actually comes in, beat almost any gadget you can buy. This standard keeps the work occupant-safe: no wiring, no combustion equipment, no disturbing old paint. Mastery looks like hands that can find a draft with a bare palm and close it for good. This packet is one home's worth of that: find the gaps, seal them, photograph the proof.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790565685979_awhx90a","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790565685979_awhx90a