a resident's own home, Ozona, TX 76943 (Crockett County; best-estimate location, exact address not confirmed)
Fit a backflow preventer onto the outdoor hose taps.
An ordinary garden hose left connected to an outdoor tap is a direct, unprotected link into the same pipes that feed the Read all of it
Not funded yet. Settles as earned credit, $80 proposed.
Proof it takes, the deadline, the level
- Proofresident permission plus before/after photos of each tap plus leak check plus fitted-tap count
- Open until2026-11-12
- Levelentry
All of it: the words, the place, the proof
An ordinary garden hose left connected to an outdoor tap is a direct, unprotected link into the same pipes that feed the house and the street. If pressure in the main drops even briefly, water can be pulled backward out of whatever the hose end happens to be sitting in and back into the drinking-water system. A hose-bib vacuum breaker is a small threaded brass fitting that closes that path.
Fund it for $80. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- 1. Confirm the resident's permission and shut the water off at each outdoor tap before starting.
- 2. Screw a code-listed ASSE 1011 hose bib vacuum breaker onto each outdoor tap by hand, then snug it a quarter turn with a wrench, never over-tightening.
- 3. Turn the water back on and run the tap briefly to confirm the vacuum breaker holds with no leak at the threads.
- 4. Photograph the fitted vacuum breaker on each tap and record how many outdoor taps at the home now carry one.
What counts as done
- Written or recorded permission from the resident
- Confirmation that the water was shut off at the tap before the vacuum breaker was fitted
- Before photo of the bare outdoor tap and after photo of the fitted vacuum breaker
- Confirmation that the tap was run briefly afterward with no leak at the fitting
- Site record: the exact site's name and street address, and the contact who agreed to the work
Proof is measured against these, not judged by taste.
The standard this serves
Drinking Water Safety. Drinking water safety rests on hard numbers: the EPA and the World Health Organization publish exact limits for lead, bacteria, nitrates, and the rest, the line between water that is safe and water that only looks safe. Clear water can fail the test; slightly cloudy water can pass it. Only the test knows. Mastery means clean sampling habits, honest custody of every sample, and readings a stranger can trust. This packet is one correct sample or one careful reading, taken by the book. Every safe glass of water stands on somebody having done this properly.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790565764993_lvhd78s","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790565764993_lvhd78s