← Board

a resident's own home, Leakey, TX 78873 (Real County; best-estimate location, exact address not confirmed)

Retrofit the resident's own well-pump motor to high efficiency with a VFD, a resident's own home, Leakey, TX (Real County).

Retrofit the resident's own well-pump motor to high efficiency with a VFD, a resident's own home, Leakey, TX (Real County). Read all of it

Not funded yet. Settles as earned credit, $240 proposed.

Proof it takes, the deadline, the level
  • Prooflicensed-electrician lockout/permit record + before/after nameplate photos + commissioning sheet + post-retrofit amperage re-test + GPS
  • Open until2026-11-12
  • Leveladvanced
All of it: the words, the place, the proof

Retrofit the resident's own well-pump motor to high efficiency with a VFD, a resident's own home, Leakey, TX (Real County). This resident's own well-pump motor runs constant-speed well below its rated efficiency, burning real electricity against every irrigation and household draw; swapping in a high-efficiency motor with a variable-frequency drive matches output to actual demand and cuts that draw immediately.

Fund it for $240. Proof lands onchain when it's done.

Where
a resident's own home, Leakey, TX 78873 (Real County; best-estimate location, exact address not confirmed). Open the map
Pay
$240 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof
licensed-electrician lockout/permit record + before/after nameplate photos + commissioning sheet + post-retrofit amperage re-test + GPS

This is exactly what gets it approved. Nothing settles without it.

Level
advanced
Open until
2026-11-12
Posted by
0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

How this work is done

A documented method, so this packet comes out the same whoever does it.

Steps

  1. 1. Confirm the resident's permission and the pump's current nameplate rating, and photograph the existing motor before work.
  2. 2. Licensed electrician de-energizes and locks out/tags out the circuit before any motor or panel work; never service an energized panel.
  3. 3. Install the high-efficiency motor and variable-frequency drive, matching nameplate and drive parameters to the well's rated flow.
  4. 4. Restore power, commission the drive, and photograph the running pump with a post-retrofit amperage reading.

What counts as done

  • Licensed-electrician lockout-tagout record for the motor swap
  • Before photo of the old constant-speed motor nameplate
  • Confirmation that the new high-efficiency motor and VFD were commissioned to the well's rated flow
  • Post-retrofit amperage reading showing the reduced electrical draw at matched output
  • Site record: the exact site's name and street address, and the contact who agreed to the work

Proof is measured against these, not judged by taste.

The standard this serves

Energy Efficiency Audit. Energy efficiency work begins with the walkthrough audit, the kind the ASHRAE standard describes: a trained eye moving through a building, reading the bills, the walls, the lights, and the equipment, and coming out with the short list of fixes worth doing first. Mastery looks like an auditor who can feel where a building is bleeding money within the hour, and prove it on paper. That instinct is trained by repetition on real buildings. This packet is one repetition: one system observed, one reading taken, one finding recorded the way the standard asks.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790565805435_wmj3aua","funderWallet":"0xYOU"}.

Open, but not claimable yet. restricted: permit-required, regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Packet WORK_1790565805435_wmj3aua