700 block of E Cambria Street, Kensington, Philadelphia, PA 19134
Replace a failed single-pane window.
A crew pries out the cracked single-pane windows at 700 block of E Cambria Street and sets sealed dual-pane units into the openings. Read all of it
Not funded yet. Settles as earned credit, $700 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photos + U-factor/label photo + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Replace a failed single-pane window at 700 block of E Cambria Street, Kensington, Philadelphia, PA 19134. A rotted, non-repairable window sash on 700 block of E Cambria Street, Kensington, Philadelphia, PA 19134 leaks heat and water past anything glazing can fix; a code-compliant dual-pane replacement closes the envelope gap for good.
Fund it for $700. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Confirm occupant consent for the window this job's title names, before starting.
- Check the sash's paint condition before touching it, and confirm it is sound enough to proceed.
- Photograph the failed window before removal, showing its condition.
- Remove the rotted sash from its frame, keeping the rough opening intact.
- Set the new dual-pane replacement window into the opening, level and plumb, and fasten it per the manufacturer's instructions.
- Seal and flash the perimeter of the new window and trim it out.
- Photograph the NFRC label on the installed window, showing its U-factor and SHGC rating.
- Photograph the installed window, showing the completed replacement.
- Record the GPS location of the completed work.
What counts as done
- Before photo of the failed window
- After photo of the installed replacement
- NFRC label photo (U-factor/SHGC)
Proof is measured against these, not judged by taste.
The standard this serves
Weatherization Readiness. Weatherization readiness is the survey that turns a cold, expensive-to-heat home into a fundable plan. Following the Department of Energy's program, the surveyor maps where the house leaks air, which attics and walls lack insulation, what fresh-air path must follow the tightening, and which safety checks must clear first. Mastery looks like a walkthrough that ends with a package a weatherization crew can price without a second visit. This packet is one piece of one such survey, done carefully and written down, so a real family's real house gets closer to warm.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790769916182_7qnrrwp","funderWallet":"0xYOU"}.
Open, but not claimable yet. restricted: regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790769916182_7qnrrwp