2000 block of Cedar Street, Kensington, Philadelphia, PA 19125
Insulate the attic hatch and floor.
An installer insulates the attic hatch and tops up the accessible attic bays at 2000 block of Cedar Street, replacing a bare hatch and thin coverage with insulated, weatherstripped bays shown in the after photos. Read all of it
Not funded yet. Settles as earned credit, $640 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photos + insulation-depth measurement + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Insulate the attic hatch and floor at 2000 block of Cedar Street, Kensington, Philadelphia, PA 19125. Bare joists and an unsealed attic hatch at 2000 block of Cedar Street, Kensington, Philadelphia, PA 19125 lose heat straight up through the roof deck every winter night.
Fund it for $640. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Get the occupant's consent before starting.
- Read this job's title to see whether it names the attic floor alone or the hatch and floor together.
- Photograph the bare attic area the title names before installing anything.
- Keep your footing on the joists throughout, and wear a dust mask.
- Install insulation across the attic floor to the target depth, and fit an insulated cover on the hatch too when the title names it.
- Measure the depth of the newly installed floor insulation and photograph it in place.
- Note the insulation material and R-value used.
- Submit the before photo, the after photo with depth measurement, and the material/R-value note as proof.
What counts as done
- Before photo of the bare attic
- After photo + depth measurement
- R-value/material note
Proof is measured against these, not judged by taste.
The standard this serves
Weatherization Readiness. Weatherization readiness is the survey that turns a cold, expensive-to-heat home into a fundable plan. Following the Department of Energy's program, the surveyor maps where the house leaks air, which attics and walls lack insulation, what fresh-air path must follow the tightening, and which safety checks must clear first. Mastery looks like a walkthrough that ends with a package a weatherization crew can price without a second visit. This packet is one piece of one such survey, done carefully and written down, so a real family's real house gets closer to warm.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790769955254_x692wva","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790769955254_x692wva