1000 block of E Willard Street, Kensington, Philadelphia, PA 19134
Seal the leaking basement crack.
A worker packs hydraulic cement into the foundation crack at 1000 block of E Willard Street with a trowel. The wall now holds back groundwater instead of leaking. Read all of it
Not funded yet. Settles as earned credit, $560 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photos + moisture-meter readings + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Seal the leaking basement crack at 1000 block of E Willard Street, Kensington, Philadelphia, PA 19134. Groundwater tracks in through a foundation crack in the basement at 1000 block of E Willard Street, Kensington, Philadelphia, PA 19134 every heavy rain, the kind of slow intrusion that keeps this block's older rowhouse basements chronically damp.
Fund it for $560. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- wire brush + shop vac (surface prep)
- hydraulic cement + masonry crack sealant
- trowel + mixing bucket + water
- moisture meter + camera
Steps
- 1. ASSESS: photograph and map each crack/damp area with a moisture-meter reading; identify whether water is actively entering (active leak) or the area is just damp/stained.
- 2. Clear loose material, dirt and any surface efflorescence from the crack with a wire brush and shop vac; dampen per the product's instructions.
- 3. Pack an active leak with hydraulic cement (which sets against running water) or seal a dry crack with masonry sealant, per the product's method.
- 4. Photograph the finished seal and record the moisture-meter reading at the same spot for comparison; advise the occupant to monitor after the next rain.
What counts as done
- Before photo + moisture-meter reading at the crack
- After photo of the sealed crack
- Follow-up rain-check note left with the occupant
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790770019285_19vag39","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790770019285_19vag39