the 2300 block of Tuckaseegee Road, Enderly Park, West Charlotte, Charlotte, NC 28208
Patch the cracked siding and trim gaps.
Patch the cracked siding and trim gaps at a home on the 2300 block of Tuckaseegee Road, Enderly Park, West Charlotte, Charlotte Read all of it
Not funded yet. Settles as earned credit, $300 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photos of each patch point + material note + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Patch the cracked siding and trim gaps at a home on the 2300 block of Tuckaseegee Road, Enderly Park, West Charlotte, Charlotte, NC 28208. Hairline siding cracks, gapped trim and worn caulk on the 2300 block of Tuckaseegee Road, Enderly Park, West Charlotte, Charlotte, NC 28208's older housing stock let bulk water and drafts into the wall assembly.
Fund it for $300. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Get occupant or owner consent before starting any exterior patch work.
- Walk the siding and trim and take a before photo of each crack, gap, or worn-caulk point, recording the site's GPS location.
- Count the cracks and gaps found before patching.
- Clean out each crack or gap by hand and set the fresh caulk or patch material into it.
- Fill each gapped trim seam with the matching patch material, reaching only from ground level or a ladder no higher than 6 feet.
- Let each patch set for the material's stated working time.
- Take an after photo of each finished patch from the same vantage as its before photo.
- Record the material or product used and the total count of gaps patched.
What counts as done
- Before photos of each crack/gap
- After photos of the finished patch (matching vantage)
- Material/product note + count of gaps patched
Proof is measured against these, not judged by taste.
The standard this serves
Weatherization Readiness. Weatherization readiness is the survey that turns a cold, expensive-to-heat home into a fundable plan. Following the Department of Energy's program, the surveyor maps where the house leaks air, which attics and walls lack insulation, what fresh-air path must follow the tightening, and which safety checks must clear first. Mastery looks like a walkthrough that ends with a package a weatherization crew can price without a second visit. This packet is one piece of one such survey, done carefully and written down, so a real family's real house gets closer to warm.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790771777352_vz7amds","funderWallet":"0xYOU"}.
Open, but not claimable yet. restricted: regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790771777352_vz7amds