a residential block off Shamrock Drive, Grier Heights, Charlotte, NC 28215
Rebuild a fully spalled front step.
Rebuild a fully spalled front step at a neighboring home off Shamrock Drive, Grier Heights. Read all of it
Not funded yet. Settles as earned credit, $540 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photos + level-check + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Rebuild a fully spalled front step at a neighboring home off Shamrock Drive, Grier Heights. A neighboring home's front step on this block is fully spalled and rocking -- past the point patching can fix, a genuine trip-and-fall risk in the rain.
Fund it for $540. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- demolition hammer or chisel + hand tools (removing failed material)
- form lumber or edging + level
- concrete mix or masonry repair mortar + trowel + float
- tape measure + level + camera
Steps
- 1. ASSESS: measure the failed step's rise/run against the adjacent steps and the sidewalk grade; photograph the failure; confirm no utility lines run through the work area.
- 2. Remove the broken/spalled material down to sound substrate; form the new step edge to match the original rise/run.
- 3. Place and finish the new concrete/mortar to a level, non-slip surface, matching the adjacent step heights within a safe tolerance.
- 4. Cure per spec (barricade the stoop from use during cure) and verify the finished step's rise/run and level with a level and tape measure.
- 5. Photograph the finished, cured step from the same before vantage and remove the barricade only once fully cured.
What counts as done
- Before photo of the failed step
- After photo of the rebuilt, level step
- Level-check reading confirming a safe rise
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790772030650_0ms43q9","funderWallet":"0xYOU"}.
Open, but not claimable yet. The work qualification registry could not be read (registry file not found at /home/ubuntu/ecowealth-production-20260912/data/standards/work-qualification-v0.json), so no packet's requirements can be established. The requirement is a structured fact about this kind of work, not a line of the packet's text, and an attestation does not establish it. It is not claimable yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790772030650_0ms43q9