the neighborhood park off Shamrock Drive, Grier Heights, Charlotte, NC 28215
Repair the perimeter fence gate.
A worker rehangs a gate that has dropped off one hinge at the neighborhood park off Shamrock Drive, then tests that it swings clear and latches shut before finishing. Read all of it
Not funded yet. Settles as earned credit, $360 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photos + latch function check + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Repair the perimeter fence gate at the neighborhood park off Shamrock Drive, Grier Heights. The park's perimeter gate hangs off one hinge and no longer latches, leaving the fenced play area open to the street.
Fund it for $360. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- the 811 utility-locate confirmation + the owner or agency work authorization
- replacement posts, pickets, fabric or fencing per the agency's spec, plus ties and fasteners
- post-hole tool or driver, hand mallet, fence stretcher or tensioning tool
- string line, level, tape measure
- gloves, eye protection and hearing protection where a driver is used
- camera + GPS phone
Steps
- 1. Photograph the fence run as found, and record what failed (leaning or broken posts, cut or slack fabric, a gate that will not latch) with counts.
- 2. Confirm the owner or agency authorization for this run, and confirm the 811 locate is honored and marked before any post hole is opened.
- 3. Set a string line along the intended fence line so the repair follows the original alignment and does not creep onto a neighboring parcel.
- 4. Reset or replace the failed posts to the agency's specified depth, and replace broken pickets or fabric with the specified material.
- 5. Tension the run to the specified tension and rehang or adjust the gate so it swings and latches through its full travel.
- 6. VERIFY: confirm the finished line is plumb and straight against the string, the gate latches, and no sharp wire end or protruding fastener is left in public reach.
- 7. Photograph the repaired run from the before vantage, log the post and picket counts, and enter them in the proof record.
What counts as done
- Before photo of the failed gate/hinge
- After photo of the repaired, latching gate
- Latch function-check video
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790772102818_e457vbt","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790772102818_e457vbt