St. Maries, ID (community building, exact site not yet named)
Install the low-flow fixtures the audit found.
Install certified low-flow aerators and valves at a community building in St. Read all of it
Not funded yet. Settles as earned credit, $360 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photos per fixture + WaterSense label photo + flow-test video + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Install certified low-flow aerators and valves at a community building in St. Maries, ID. The water audit found fixtures running above WaterSense flow limits, and the swap cuts the draw immediately. Name the exact site and confirm it with its host before you claim: this listing gives only the area.
Fund it for $360. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Locate the fixture this job's title names at the site you confirmed with the host and shut off its supply valve.
- Photograph the fixture with its existing aerator or flush valve visible before removing anything.
- Remove the old aerator or flush valve by hand.
- Photograph the WaterSense label on the new low-flow aerator or flush valve before installing it.
- Fit the new low-flow aerator or flush valve onto the fixture by hand and turn the supply valve back on.
- Photograph the fixture with the new low-flow aerator or flush valve installed.
- Run the fixture and record a flow-test video showing steady, leak-free flow.
- Write down the site's exact name and street address and the contact who agreed to the work.
What counts as done
- Before photo of each fixture with the old aerator/flush valve visible
- WaterSense label photo of the new fixture/part
- After photo of each installed fixture
- Flow-test video confirming reduced, steady flow with no leaks
- Site record: the exact site's name and street address, and the contact who agreed to the work
Proof is measured against these, not judged by taste.
The standard this serves
Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790783110350_bj7amjz","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790783110350_bj7amjz