← Board

Berry Creek, CA (community building, exact site not yet named)

Swap the lighting to LED.

Replace the fluorescent and incandescent lamps at a community building in Berry Creek, CA with LED. Read all of it

Not funded yet. Settles as earned credit, $100 proposed.

Claim this job

Proof it takes, the deadline, the level
  • Proofbefore/after photos per fixture + lumen/wattage label photo + fixture count + GPS
  • Open until2026-10-30
  • Levelintermediate
All of it: the words, the place, the proof

Replace the fluorescent and incandescent lamps at a community building in Berry Creek, CA with LED. A straight LED swap cuts that load at the socket and improves the light. Name the exact site and confirm it with its host before you claim: this listing gives only the area.

Fund it for $100. Proof lands onchain when it's done.

What it looks like
A worker unscrews old bulbs from the hallway fixtures at Berry Creek and twists in LED replacements, cutting the load.

A description of this kind of work, not a record that it happened here.

Where
Berry Creek, CA (community building, exact site not yet named). Open the map
Pay
$100 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof
before/after photos per fixture + lumen/wattage label photo + fixture count + GPS

This is exactly what gets it approved. Nothing settles without it.

Level
intermediate
Open until
2026-10-30
Posted by
0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

How this work is done

A documented method, so this packet comes out the same whoever does it.

Steps

  1. Coordinate with the district facilities staff escort to confirm the exact site's name and street address and record the contact who agreed to the work.
  2. Walk the site with the escort and count every fixture due for the swap, noting the wattage or lamp type at each one.
  3. Photograph each fixture as found, with the existing bulb or tube/wattage label visible.
  4. Power off the fixture at its switch or breaker.
  5. Position a properly rated ladder with a spotter steadying it, then remove the old bulb or tube.
  6. Install the new LED lamp matched to the socket and fitting.
  7. Restore power at the switch or breaker and cycle the fixture on and off to confirm it lights.
  8. Photograph the retrofitted fixture with the new LED lamp and its wattage or lumen label visible.
  9. Tally the number of fixtures retrofitted against the campus total and record the GPS location.

What counts as done

  • Before photo of each fixture with the old bulb/tube/wattage visible
  • After photo of each fixture with the new LED lamp/label visible
  • Count of fixtures retrofitted matched against the campus total
  • Every retrofitted fixture confirmed working (on/off cycle test)
  • Site record: the exact site's name and street address, and the contact who agreed to the work

Proof is measured against these, not judged by taste.

The standard this serves

Energy Efficiency Audit. Energy efficiency work begins with the walkthrough audit, the kind the ASHRAE standard describes: a trained eye moving through a building, reading the bills, the walls, the lights, and the equipment, and coming out with the short list of fixes worth doing first. Mastery looks like an auditor who can feel where a building is bleeding money within the hour, and prove it on paper. That instinct is trained by repetition on real buildings. This packet is one repetition: one system observed, one reading taken, one finding recorded the way the standard asks.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790789697734_qn5stuv","funderWallet":"0xYOU"}.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund
Vote for it, free Pledge backing, free Fund this work, $100

Packet WORK_1790789697734_qn5stuv