Swap the lighting to LED.

Replace the fluorescent and incandescent lamps at a community building in Hilmar, CA with LED. Read all of it

Not funded yet. Settles as earned credit, $100 proposed.

Claim this job

Proof it takes, the deadline, the level

Proofbefore/after photos per fixture + lumen/wattage label photo + fixture count + GPS
Open until2026-10-30
Levelintermediate

All of it: the words, the place, the proof

Replace the fluorescent and incandescent lamps at a community building in Hilmar, CA with LED. A straight LED swap cuts that load at the socket and improves the light. Name the exact site and confirm it with its host before you claim: this listing gives only the area.

Fund it for $100. Proof lands onchain when it's done.

What it looks like: A worker unscrews old bulbs from the hallway fixtures at Hilmar and twists in LED replacements, cutting the load.
A description of this kind of work, not a record that it happened here.
Where: Hilmar, CA (community building, exact site not yet named). Open the map
Pay: $100 proposed
This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: before/after photos per fixture + lumen/wattage label photo + fixture count + GPS
This is exactly what gets it approved. Nothing settles without it.
Level: intermediate
Open until: 2026-10-30
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Steps

Confirm the exact site's name, street address and the contact who agreed to the work, then record these details for the site record.
Coordinate access with the church facilities contact before starting work.
Photograph each fixture in place, capturing the old bulb, tube or wattage label clearly, before touching it.
Power off each fixture at its switch or breaker before removing the old lamp or tube.
Set up a properly rated ladder with a spotter present, then remove the old lamp or tube and install the new LED replacement.
Restore power to the fixture and cycle it on and off to confirm the new LED works.
Photograph each retrofitted fixture again, capturing the new LED lamp and its label clearly.
Count every fixture retrofitted and match the count against the hall's total fixture count.
Record the GPS location and submit the before and after photos, the fixture count, the site record and the on/off test results as the job's proof.

What counts as done

Before photo of each fixture with the old bulb/tube/wattage visible
After photo of each fixture with the new LED lamp/label visible
Count of fixtures retrofitted matched against the hall's total
Every retrofitted fixture confirmed working (on/off cycle test)
Site record: the exact site's name and street address, and the contact who agreed to the work

Proof is measured against these, not judged by taste.

The standard this serves

Energy Efficiency Audit. Energy efficiency work begins with the walkthrough audit, the kind the ASHRAE standard describes: a trained eye moving through a building, reading the bills, the walls, the lights, and the equipment, and coming out with the short list of fixes worth doing first. Mastery looks like an auditor who can feel where a building is bleeding money within the hour, and prove it on paper. That instinct is trained by repetition on real buildings. This packet is one repetition: one system observed, one reading taken, one finding recorded the way the standard asks.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790790242268_1xedf6m","funderWallet":"0xYOU"}.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Vote for it, free Pledge backing, free Fund this work, $100

Packet WORK_1790790242268_1xedf6m