the San Ardo Water District service area, San Ardo, CA 93450
Repair a flagged service-line leak.
Repair a flagged service-line leak in the San Ardo Water District area, site 2. Read all of it
Not funded yet. Settles as earned credit, $260 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photos + shutoff-and-repair record + pressure-test confirm + GPS + the repairer's license or permit number
- Open until2026-10-30
- Leveladvanced
All of it: the words, the place, the proof
Repair a flagged service-line leak in the San Ardo Water District area, site 2. The survey flagged this service line for a likely leak; repairing the fitting or line stops real water loss on a small system with a thin rate base and every gallon accounted for.
Fund it for $260. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Record the license or permit number of the water-system operator or plumber doing the repair.
- Photograph the leaking fitting or line at the flagged location before starting any work.
- Shut off the service line at the curb stop serving the flagged site.
- Record which shutoff valve was used and identify the specific fitting or section to be repaired or replaced.
- Repair or replace the flagged fitting or line section.
- Backfill or otherwise restore the repaired area.
- Photograph the completed, backfilled or restored repair.
- Turn the service line back on at the curb stop.
- Run a pressure or flow test on the repaired line, confirm the leak has stopped, and record the test result together with the shutoff and repair record and the site's GPS location as the closing proof.
What counts as done
- Before photo of the leaking fitting/line location
- Record of the shutoff valve used and the specific fitting/section repaired or replaced
- After photo of the completed, backfilled or restored repair
- Pressure/flow test confirming the leak is stopped
- License or permit number of the water-system operator or plumber performing the repair
Proof is measured against these, not judged by taste.
The standard this serves
Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790793052554_eq71kiu","funderWallet":"0xYOU"}.
Open, but not claimable yet. restricted: permit-required, regulated. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790793052554_eq71kiu