the 4400-4500 block of Clara St, Cudahy, CA 90201
Install low-flow fixtures.
Replace this unit's standard-flow fixtures on the Clara St block in Cudahy, CA with WaterSense-rated aerators and showerheads. Read all of it
Not funded yet. Settles as earned credit, $95 proposed.
Proof it takes, the deadline, the level
- Prooflandlord-permission record + before/after photos + flow-rate measurement + WaterSense label photo + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Replace this unit's standard-flow fixtures on the Clara St block in Cudahy, CA with WaterSense-rated aerators and showerheads. That cuts the tenant's water bill without changing how the household uses water or requiring any lease-altering work.
Fund it for $95. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Get the tenant's and the landlord's or property manager's permission for the fixture swap and record it.
- Photograph each existing fixture targeted for replacement, noting any flow rate printed on it.
- Shut off the supply valve before removing each fixture.
- Remove each old fixture and install the WaterSense-rated low-flow aerator or showerhead per the manufacturer's instructions.
- Photograph the WaterSense label or model marking on each installed fixture.
- Turn the supply valve back on and check the connection for leaks.
- Photograph each installed fixture.
- Measure the flow rate at each installed fixture and confirm it meets the WaterSense-rated maximum.
What counts as done
- Written or recorded landlord/property-manager permission for the fixture swap
- Before photo of each existing fixture with its flow rate noted where labeled
- WaterSense-rated replacement label/model photo
- After photo of each installed fixture
- Flow-rate measurement confirming the WaterSense-rated maximum after install
Proof is measured against these, not judged by taste.
The standard this serves
Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790793128596_zpfrvb5","funderWallet":"0xYOU"}.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790793128596_zpfrvb5