Maxey Park, Pecos, TX
Install a ground-mounted shade structure.
A crew digs footings with a post-hole digger at the bare plaza in Maxey Park, then anchors a fabric shade structure to give it real shade. Read all of it
Not funded yet. Settles as earned credit, $780 proposed.
Proof it takes, the deadline, the level
- Proof811 locate confirm + before/after photos + anchor-torque/footing photo + fabric-tension check + GPS
- Open until2026-10-30
- Levelintermediate
All of it: the words, the place, the proof
Install a ground-mounted shade structure at Maxey Park, Pecos, TX. The open ground at Maxey Park sits in full sun with no shade for people waiting or resting. A ground-mounted fabric shade structure cuts the surface heat and gives seniors, kids, and transit riders a cooler place to stand. This packet covers the anchored ground install only, coordinated with the city.
Fund it for $780. Proof lands onchain when it's done.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Steps
- Get the city or BID's consent for the shade structure work at the site this job's title names.
- Call 811 for a utility locate before any post-hole or anchor work, and record the locate reference.
- Take a before photo of the bare, unshaded area.
- Dig the ground anchor footings at the marked, cleared locations.
- Set the structure's posts plumb into the footings and secure them.
- Take a photo of the anchor and footing confirming a secure, code-matched installation.
- Attach and tension the fabric across the structure per the manufacturer's wind-load spec, so it sits taut with no sag or flap points.
- Take an after photo of the installed structure with posts plumb and fabric taut.
- Record the 811 locate reference and a GPS pin as the proof.
What counts as done
- Before photo of the bare, unshaded plaza area
- 811 locate reference before any footing/anchor work
- After photo of the installed structure with posts plumb and fabric taut, no sag or flap points
- Anchor/footing photo confirming a secure, code-matched installation
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790799438885_dyzsvxr","funderWallet":"0xYOU"}.
Open, but not claimable yet. restricted: permit-required. Regulated or permit-required work cannot be claimed on this rail yet. It stays readable; voting and pledging are free, and funding is separate from claiming.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790799438885_dyzsvxr