← Board

resident homes along the Beaton Street / 12th Street corridor, Corsicana, TX 75110 (own-home)

Install low-flow fixtures.

A worker swaps a showerhead for a WaterSense fixture at resident homes along the Beaton Street / 12th Street corridor, turning full-force spray into a low-flow stream. Read all of it

Not funded yet. Settles as earned credit, $85 proposed.

Claim this job

Proof it takes, the deadline, the level
  • Proofhomeowner/resident-permission record + before/after photos + flow-rate measurement + WaterSense label photo + GPS
  • Open until2026-10-30
  • Levelentry
All of it: the words, the place, the proof

Install WaterSense-rated aerators and showerheads at this home along the Beaton Street / 12th Street corridor in Corsicana. This home still runs standard-flow faucet aerators and showerheads, driving up the household's municipal water bill for no benefit over a WaterSense-rated swap against periodic Blackland Prairie drought.

Fund it for $85. Proof lands onchain when it's done.

What it looks like
A worker swaps a showerhead for a WaterSense fixture at resident homes along the Beaton Street / 12th Street corridor, turning full-force spray into a low-flow stream.

A description of this kind of work, not a record that it happened here.

Where
resident homes along the Beaton Street / 12th Street corridor, Corsicana, TX 75110 (own-home). Open the map
Pay
$85 proposed

This packet is not funded yet, so this figure is a proposed price and not money waiting in escrow. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof
homeowner/resident-permission record + before/after photos + flow-rate measurement + WaterSense label photo + GPS

This is exactly what gets it approved. Nothing settles without it.

Level
entry: anyone can start here
Open until
2026-10-30
Posted by
0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

How this work is done

How this work is done

A documented method, so this packet comes out the same whoever does it.

Steps

  1. Get the resident's written or recorded permission before starting.
  2. Photograph each existing faucet aerator or showerhead as found.
  3. Shut off the fixture's water supply valve.
  4. Unscrew the old aerator or showerhead.
  5. Photograph the WaterSense label on the new aerator or showerhead before installing it.
  6. Thread on the new WaterSense-rated aerator or showerhead and tighten it.
  7. Turn the supply valve back on and check the connection for leaks.
  8. Photograph each installed fixture together with a flow-rate measurement confirming it meets the WaterSense maximum.
  9. Record the GPS location and submit the photos and measurement as proof.

What counts as done

  • Written or recorded permission from the resident
  • Before photo of each existing fixture
  • WaterSense-rated replacement label/model photo
  • After photo of each installed fixture with a flow-rate measurement confirming the WaterSense maximum

Proof is measured against these, not judged by taste.

The standard this serves

Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment that backs the wage. Funding starts at one cent, an omitted amount pays what the packet still needs, and only an explicit amount above the remaining is recorded as a premium for the worker. Money settles only on accepted proof. An agent can fund it in one x402 call: POST /nurture/fund {"workId":"WORK_1790809446966_563iy55","funderWallet":"0xYOU"}.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund
Vote for it, free Pledge backing, free Fund this work, $85

Packet WORK_1790809446966_563iy55