At home / Chicago, IL area (any household, priority for pre-1986 plumbing or suspected lead service line)
Household lead-in-water screen, first-draw + flushed (certified lab), Chicago, IL.
Collect a paired first-draw and flushed tap water sample from a Chicago home for a certified-lab lead test. Read all of it
Not funded yet. Settles as earned credit, $140 proposed.
Proof it takes, the deadline, the level
- ProofFirst-draw, flushed lead results collected per lab protocol + Signed chain of custody recorded + Results compared only to EPA action-level framing + Utility lead-service-line status queried + Every finding routed per the iron law + Sampling date noted: one round can miss spikes
- Open until2027-01-29
- Levelentry
All of it: the words, the place, the proof
Collect a paired first-draw and flushed tap water sample from a Chicago home for a certified-lab lead test. Lead from old pipes or solder is not visible, and it can come out in sudden spikes. Use the lab's sample jars and form; no special training is needed.
Offer to pay $140. The receipt lands onchain once the proof is approved.
Safety, read before you claim
Never read a tap result as an all-clear; a child under 6 or a pregnant person in the home goes to a clinician for a blood-lead conversation regardless. Any cited filter must carry NSF/ANSI 53 for lead, an interim measure only.
The full safety list for this job:
- Sample collection and result reading is against EPA action-level framing only, and the certified lab is the measurement authority, never a household 'safe' verdict.
- Lead has no established safe level for children, and blood lead level, not the tap number, is the actual health measure.
- Elevated results route to the local utility's lead-service-line inquiry and to the certified lab for confirmation or retesting.
- Keep any cited filter on its cartridge-replacement schedule, it is never a substitute for service-line resolution.
- The Chicago paper is a simulation, context only: this packet never says how likely any home is to have a spike, never changes the lab's own sampling instructions, and treats a single clear-looking result as one reading, not an all-clear.
- This packet is independent of and not affiliated with the University of Illinois Chicago or the study authors: named as the real, verified home of a published simulation study, not an endorsement or partnership; it names no Illinois authority or lab since none was read.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- The certified laboratory's lead sampling kit (separate bottles for first-draw and flushed samples)
- A tap that has NOT been used for at least 6 hours before first-draw sampling (per standard protocol)
- Chain-of-custody form
- Household plumbing age/type records if known (year built, known pipe material, known lead service line status)
Steps
- 1. Confirm eligibility for urgent-priority screening: home built before 1986 (lead solder ban), a known or suspected lead service line, or a child under 6 / pregnant person in the household.
- 2. Contact the local water utility to ask directly whether a lead service line serves the property (many utilities maintain a public lead service line inventory/map under current EPA rule requirements).
- 3. Following the certified lab's kit instructions exactly, collect a FIRST-DRAW sample after the required non-use period (no flushing, first water out of the tap).
- 4. Following the same kit's instructions, collect a FULLY FLUSHED sample after running the tap for the lab-specified flush time.
- 5. Complete the chain-of-custody form noting the collection tap, non-use period, and any known plumbing/service-line facts.
- 6. Record the lab's reported first-draw and flushed lead results once received, in micrograms/L (ppb), with the lab's name and certification.
- 7. Compare both results only to EPA's action-level framing (currently 15 ppb at the system level; EPA is proposing 10 µg/L) — record the comparison, never a household 'safe' verdict, and route per the decision rules.
What counts as done
- Certified laboratory named, with first-draw and flushed samples collected per its own kit instructions and a signed chain-of-custody form
- Local water utility contacted (or contact attempt recorded) regarding lead service line status at the property
- Both lead results reported in µg/L (ppb) with the lab's name/certification, compared explicitly to EPA's action-level framing; no household 'safe' verdict written
- Pre-1986 plumbing status and any known service-line material recorded as context
- The sampling date recorded, with a note that one round of sampling can miss intermittent lead spikes, and any repeat round offered by the lab or utility recorded
- Any elevated result, or any household with a child under 6 or a pregnant person, routed per the decision rules
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1790842040205_701n2yz