← Board

Barnsdall Art Park, 4800 Hollywood Blvd, Los Angeles, CA 90027

Top up the worn impact-cushion mulch under the playground, Barnsdall Art Park, 4800 Hollywood Blvd, Los Angeles, CA 90027.

A worker rakes and tops up the worn playground mulch under the play structure at Barnsdall Art Park with fresh wood fiber, measuring the depth with a ruler at each drop zone. Read all of it

Not funded yet. Settles as earned credit, $260 proposed.

Proof it takes, the deadline, the level
  • Proofbefore/after depth photos at 3+ drop zones + material-delivery photo + raking/leveling confirm + GPS
  • Open until2027-02-09
  • Levelentry
All of it: the words, the place, the proof

Fill the worn impact-cushion mulch under the play structure back to depth at Barnsdall Art Park, 4800 Hollywood Blvd, Los Angeles, CA 90027. The hazard survey is expected to find the engineered-wood-fiber layer hard-packed and shallow at the busiest drop zones: kids land on compacted ground instead of a cushioned surface. Getting back to the required level restores the standard this equipment needs. For the payer: - Price: $260 per job, counted in square feet of surfacing refilled, with depth readings. - Likely payer: A grant-funded nonprofit crew (LA Conservation Corps, LANI, Clean California or CAL FIRE grants), or the site's host. - No license is needed: topping up surfacing mulch by hand is maintenance, not construction work, so no contractor license applies.

Offer to pay $260. The receipt lands onchain once the proof is approved.

What it looks like
A worker rakes and tops up the worn playground mulch under the play structure at Barnsdall Art Park with fresh wood fiber, measuring the depth with a ruler at each drop zone.

A description of this kind of work, not a record that it happened here.

Where
Barnsdall Art Park, 4800 Hollywood Blvd, Los Angeles, CA 90027. Open the map
Pay
$260 proposed

This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof
before/after depth photos at 3+ drop zones + material-delivery photo + raking/leveling confirm + GPS

This is exactly what gets it approved. Nothing settles without it.

Level
entry: anyone can start here
Open until
2027-02-09
Posted by
0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

Safety, read before you claim

No special training is needed; coordinate timing with the park operator so the play area stays fenced or closed throughout. Never move material before the use zone is closed, and keep the area clear of active play until leveled; wear boots and gloves when raking.

The full safety list for this job:

  • Gear, Title 8 sections 3385 and 3384: sturdy closed-toe boots for shovel and tool strikes on rough ground; leather-palm gloves for thorns, glass and soil contact.
  • Wildfire smoke, section 5141.1: at a PM2.5 AQI of 151 or more the employer provides N95 respirators for voluntary use and moves the work indoors or cuts exposure where feasible; above AQI 500 respirators are required under a respiratory protection program.
  • Heat, section 3395: drinking water, shade and cool-down rests; shade is ready at 80 F and the high-heat steps start at 95 F.
  • Orientation, section 3203: the crew's injury and illness prevention program orientation comes before any work.
How this work is done

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

  • the surfacing material specified for this playground (engineered wood fiber, loose fill or the poured-in-place patch kit)
  • depth probe or a marked measuring rod + tape measure
  • rake, shovel, wheelbarrow and a screed board
  • the equipment's posted fall height and the surfacing manufacturer's depth table
  • site closure signage and barrier tape
  • gloves and eye protection
  • camera + GPS phone

Steps

  1. 1. ASSESS: photograph the use zone as found and probe the surfacing depth at the fall-critical points (under swings, at slide exits, beneath climbers), recording every reading.
  2. 2. Close the use zone with signage and barrier tape before any material is moved; a partially filled use zone is more dangerous than a worn one.
  3. 3. Remove contamination and compacted material from the repair area, and check the sub-base drains rather than holding water.
  4. 4. Place the specified surfacing to the depth the manufacturer's table gives for this equipment's posted fall height, raking level across the whole use zone rather than only the worn patch.
  5. 5. VERIFY: re-probe the same fall-critical points and record the depths; confirm each meets or exceeds the table value for the posted fall height.
  6. 6. Confirm the use-zone extent still meets the CPSC handbook clearance around the equipment, then reopen and photograph from the before vantage; enter depths and photos in the proof record.

What counts as done

  • Before photos with a ruler showing the worn mulch depth at 3+ drop zones
  • Material-delivery/source photo
  • After photos with a ruler showing the topped-up depth (ASTM F1292 minimum) at the same 3+ zones
  • Raked, leveled surface confirmed with no buried hazards (rocks, debris) under the new material
  • Scope: the park's or site host's written scope for this mulch refill, and the work order of any crew or grantee that sent you, dated before the first photo.
  • Site consent: the site host's or agency's written consent to work there, dated before the first photo.
  • Sign-off: the site host or steward, or the supervisor of the crew of record, signs off the finished work in writing. Write who signed and the date, or the date you asked.
  • Photos: take the before photo and the after photo from the same point (stand where the first one was taken and match its frame), each with its GPS point and its date and time.

Proof is measured against these, not judged by taste.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Packet WORK_1794290280610_jpwwjfo