Regrade and clear an eroded bike-path segment, LA River, site 2.

A worker uses hand tools to regrade the rutted bike-path surface and logs the fill material used at an eroded bike-path segment near Ripple St, working behind cones set out to protect passing cyclists and walkers. Read all of it

Not funded yet. Settles as earned credit, $480 proposed.

Claim this job

Proof it takes, the deadline, the level

Proofbefore/after photos + regrade log + GPS
Open until2026-12-25
Levelintermediate

All of it: the words, the place, the proof

Grade and clear the eroded LA River bike-path segment near Ripple St in Los Angeles. Runoff has cut ruts across it, catching wheels and pooling water after rain.

Offer to pay $480. The receipt lands onchain once the proof is approved.

What it looks like: A worker uses hand tools to regrade the rutted bike-path surface and logs the fill material used at an eroded bike-path segment near Ripple St, working behind cones set out to protect passing cyclists and walkers.
A description of this kind of work, not a record that it happened here.
Where: Frogtown, an eroded bike-path segment near Ripple St, Elysian Valley, Los Angeles, CA 90039. Open the map
Pay: $480 proposed
This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: before/after photos + regrade log + GPS
This is exactly what gets it approved. Nothing settles without it.
Level: intermediate
Open until: 2026-12-25
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

Safety, read before you claim

Needs the land manager's authorization; no licence is asked for; anyone who can use hand tools can do it. Hand tools and walk-behind equipment only; cone the work zone against bike and pedestrian traffic, and never work during a habitat or seasonal closure.

The full safety list for this job:

Wear a hi-vis vest near traffic.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

the land manager's work authorization and the trail's design tread width
hand tools: McLeod or rake, pulaski or mattock, loppers, shovel
erosion-control matting, staples, and locally specified surfacing or step material
clinometer or level for outslope and grade
gloves, eye protection and sturdy footwear
camera + GPS phone
hand tamper (to compact the fill in the ruts)
tape measure (to measure the finished tread width)
watering can or bucket (to water-test a drain outlet)

Steps

1. Photograph the trail segment as found and record what is failing (rutting, a blocked drain, a widened tread, an eroding step or fall line).
2. Confirm the land manager's authorization for this segment and confirm no habitat or seasonal closure applies today.
3. Restore drainage first: clear the existing grade dips and drain outlets so water leaves the tread, because tread repair without drainage fails in one storm.
4. Repair the tread to the design width and to a 3 to 5 percent outslope, filling ruts with compacted mineral soil rather than loose duff.
5. Set matting, check steps or armoring by hand where the grade needs it, staking to the spec and keying the edges into the tread.
6. VERIFY: measure the finished outslope and tread width, and water-test one drain outlet to show water leaves the trail rather than running down it.
7. Photograph the finished segment from the before vantage, log the segment length worked, and enter both in the proof record.

What counts as done

Before photo of the eroded segment
Regrade/material log
After photo of the restored surface

Proof is measured against these, not judged by taste.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Vote for it, free Pledge backing, free

Packet WORK_1794291010268_cckr2br