Install zoned drip irrigation on the community farm plot, the Slauson Avenue corridor, Hyde Park, Los Angeles, CA 90043.

Install zoned drip irrigation across the farm plot at the Slauson Avenue corridor in Hyde Park, Los Angeles, CA. The freshly built multi-bed plot has no watering plan and volunteers cannot hand-water every bed every day; the timed zones keep every bed watered on a fraction of what hand-watering would use. Without a timer line the bed goes dry between hand waterings and the plants suffer. For the payer: - Price: $560 per job, counted in square feet watered and zones installed. - Likely payer: LADWP rebate programs, paid to the account holder after the program's pre-approval. - No license is needed while the whole job, labor and materials together, stays under $1,000 (Business and Professions Code section 7048); at $1,000 or more, a CSLB C-27 Landscaping license.

Offer to pay $560. The receipt lands onchain once the proof is approved.

What it looks like

A worker lays drip tubing across the unwatered farm plot at the Slauson Avenue corridor and connects each zone to the hose-bib timer, so every emitter wets its bed evenly.

A description of this kind of work, not a record that it happened here.

Where

the Slauson Avenue corridor, Hyde Park, Los Angeles, CA 90043. Open the map

Pay

$560 proposed

This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.

Proof

before/after photos + zone-map log + pressure-regulator/backflow-preventer photo + leak/flow test video per zone + GPS

This is exactly what gets it approved. Nothing settles without it.

Level

intermediate

Open until

2026-12-10

Posted by

0x034F…6c89

The creator wallet. Its signature is what approves proof and settles the wage.

Connect only at an existing hose bib, never cut into a pipe, and fit the backflow preventer first at the tap. Get the owner's and manager's consent first, keep tubing off the walkway, and wear gloves, eye protection and boots with water and shade close.

The full safety list for this job:

• Backflow preventer required at the hose-bib tap; never tie into a potable line without one; keep tubing off the walkway travel path.
• Property-owner/community-organization consent precedes work.
• Never add to a pipe either. Put every part after the backflow preventer in the order its package states: timer, filter, pressure regulator, tubing. Keep hoses off the walkway as well as tubing. Wear closed-toe boots. A hose bib is already a potable connection; the backflow device protects the building's water from the garden. Use a hose-connection dual-check backflow preventer when a timer valve sits anywhere after it, and a bare hose-bib vacuum breaker only where no valve follows it (read the package). Fit a filter and a regulator to about 25 psi, because house pressure in LA often runs 60 to 90 psi and blows drip fittings. Keep the device above the highest emitter. Use tubing sold for drip irrigation, never old garden hose or recycled-rubber hose, on a food bed. Never connect to purple pipe or a greywater source. Keep tubing and hoses off the walkway travel path.
• Site briefing; confirm where the shutoff is and who to call (Title 8 section 3203).
• A quart of water an hour, shade at 80 degrees F and above, watch each other at 95 and above (Title 8 section 3395).
• Check the wildfire smoke AQI; at 151 or more ask for an N95 (Title 8 section 5141.1).
• Gloves and closed-toe boots (section 3385); eye protection for cutting tubing and punching (Title 8 section 3384).
• Shallow tubing under mulch needs none; any stake or hole deeper than a trowel needs a locate and the 24 inch hand-dig zone (Title 8 section 1541).
• Footwear, Title 8 section 3385: sturdy boots for digging tools and heavy pipe.

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.