the Pacific Blvd corridor, Huntington Park, CA 90255
Clear and check a storm-drain inlet, inlet 1 -- the Pacific Blvd corridor, Huntington Park, CA 90255.
A worker in gloves rakes leaves and litter off a storm-drain inlet grate from the curb at the Pacific Blvd corridor, bags the debris, and water then flows freely into the inlet. Read all of it
Not funded yet. Settles as earned credit, $220 proposed.
Proof it takes, the deadline, the level
- Proofbefore/after photo pairs per inlet + water-flow video + disposal photo + GPS
- Open until2026-12-10
- Levelintermediate
All of it: the words, the place, the proof
Clear the grate and check storm-drain inlet 1 at the Pacific Blvd corridor in Huntington Park, CA. The curb inlets here clog with leaves and litter during hard rains, so runoff ponds at the curb and carries the block's trash downstream. Keeping them clear is real, repeating stormwater work. Debris, sediment and litter block the storm-drain inlet, so runoff cannot drain freely.
Offer to pay $220. The receipt lands onchain once the proof is approved.
Safety, read before you claim
Intermediate skill; this job asks for no licence. Work from the curb with cones set, in gloves and hi-vis: never enter or reach into the drain, never lift a seized grate, and stay out of the traffic lane; employer provides water, shade and cool-down rests.
The full safety list for this job:
- Work from the curb in hi-vis and gloves with a spotter facing traffic and cones out of every lane; never lift, reach into or reset a grate, and stop in rain or running water. Never touch needles by hand: use tongs and a sharps container.
- Never reach into the basin below the grate, and never step into the traffic lane. Unknown containers are never touched by hand. A broken or missing grate is coned, photographed from a distance and reported to the owner agency, not fixed. Gas (methane, hydrogen sulfide, sewer gas) can rise through an inlet: step back at any smell, report it, no smoking or sparks. A storm drain or inlet is a confined space: Title 8 Article 37 (sections 1950 to 1962), the confined space rules for construction work, names storm drains and covers this repair and maintenance work, so nobody enters. Section 5157 is the general industry rule for the owner's own maintenance staff. A cast iron grate can weigh 50 to 150 pounds, so the crew never lifts one; a displaced grate is an open hole the city fixes. Gutter water carries oil, bacteria and sharps: wash before eating, cover cuts, keep tetanus shots current. Bag debris and put it where the owner agency says; never push it into the inlet, never hose the gutter, never leave bags on the sidewalk.
- Orientation to the plan before the first inlet: who to call, what to stop for (Title 8 section 3203).
- Hours of curb work in sun and heat off asphalt: water, shade, rest breaks, watch each other (Title 8 section 3395).
- Check the air quality index; at 151 or more the crew is told and offered respirators (Title 8 section 5141.1).
- Hi-vis and a spotter facing traffic do not control traffic; where cones cannot, a trained flagger or the City's traffic control plan is needed (Title 8 section 1599).
- Needles and glass sit in gutters and grates: tongs and a sharps container, never bare hands (Title 8 section 5193).
- Eye protection against flicked grit and cut-resistant gloves; plain work gloves do not stop glass (Title 8 section 3382).
- Gear, Title 8 sections 3385 and 3384: waterproof puncture-resistant boots for needles, glass and slick wet footing at the curb; cut-resistant gloves for glass, sharps and contaminated runoff.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- tongs and a puncture-proof sharps container
- cut-resistant gloves
- eye protection
- a second hi-vis vest for the spotter
Steps
- ASSESS: check the weather (no rain in the last day or forecast in the window) and read the posted curb signs (peak hour and sweeping restrictions). Then photograph the inlet as found (grate, apron, gutter approach), note the blockage type and any damage (broken grate, displaced apron concrete), and record GPS.
- Set cones along the curb or parking lane only, with a second person watching traffic and hi-vis on both of you. All work is from the sidewalk or curb: never step into the traffic lane, and never enter, reach into, or open the drain structure. If cones would narrow a travel or bike lane, do not do the job there.
- Clear debris, sediment and litter from the grate surface and the gutter approach with a rake or grabber and gloves, never bare hands. Bag it and take the bags where the owner agency says or to a bin the owner allows. Street sediment is not green waste.
- Do not lift a grate or patch concrete. Photograph any damage (a broken or displaced grate, apron spalls) from the sidewalk and report it to the owner agency.
- VERIFY: photograph the cleared inlet from the same vantage. Only after the grate is clear, pour a bucket of clean water from the gutter lip to show flow into the inlet; never use a hose and never pour where the flow reaches traffic. Report any structural damage to the municipal stormwater line (311 or MS4 contact) with photos.
What counts as done
- Before/after photos of the inlet from matching vantage
- Water-flow photo/video into the cleared inlet
- Debris disposal photo (green waste separated) + any 311/MS4 report reference
- Before and after photos from the same spot.
- The owner agency's name.
- The report reference for any damage.
- Where the bags went.
- The after photo is described as 'grate surface and gutter approach cleared', never 'inlet cleared', because a photo cannot show the basin below.
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1794292250426_x49vcyx