← Board

the 4700 block of Crenshaw Blvd, Hyde Park, Los Angeles, CA 90043 (commercial strip building)

ASHRAE Level 1 energy audit: commercial strip building, 4700 block of Crenshaw Blvd.

An auditor checks HVAC and lighting with a light meter at the 4700 block of Crenshaw Blvd, turning guesswork into a written energy baseline. Read all of it

Not funded yet. Settles as earned credit, $500 proposed.

Claim this job

Proof it takes, the deadline, the level

Proofphoto inventory + GPS + 12-mo utility summary + no-cost/low-cost list
Open until2026-12-25
Leveladvanced

All of it: the words, the place, the proof

Audit the strip building at the 4700 block of Crenshaw Blvd, Hyde Park, Los Angeles, CA 90043 for energy use at ASHRAE Level 1. It runs a decades-old rooftop gas unit over sealed storefront glass all day with no energy baseline to sequence a retrofit. Confirm with the site's host before you claim: this listing names a block, not a building, and does not mean any owner asked for the work.

Offer to pay $500. The receipt lands onchain once the proof is approved.

What it looks like: An auditor checks HVAC and lighting with a light meter at the 4700 block of Crenshaw Blvd, turning guesswork into a written energy baseline.
A description of this kind of work, not a record that it happened here.
Where: the 4700 block of Crenshaw Blvd, Hyde Park, Los Angeles, CA 90043 (commercial strip building). Open the map
Pay: $500 proposed
This job is not funded yet, so this figure is a proposed price, not money held for the worker. If a buyer funds it, approved proof settles that price onchain. If nobody funds it, approved proof earns provable credit toward the work instead of cash: recorded, and readable any time at vealth.net/labor/credit/(your wallet). You see which before you claim, never after.
Proof: photo inventory + GPS + 12-mo utility summary + no-cost/low-cost list
This is exactly what gets it approved. Nothing settles without it.
Level: advanced
Open until: 2026-12-25
Posted by: 0x034F…6c89
The creator wallet. Its signature is what approves proof and settles the wage.

Safety, read before you claim

Needs someone able to run an ASHRAE Level 1 audit; roof access only with the building manager's escort. Never do live-electrical work or adjust gas; on scorched wiring or a gas odor, stop and hand off, and use ladder and roof-edge safety.

How this work is done

A documented method, so this packet comes out the same whoever does it.

Bring

tablet/clipboard
tape measure
light meter (lighting scope)
clamp thermometer (refrigeration scope)
12-month utility bills
camera
ladder + spotter (high fixtures)

Steps

1. Confirm the address; arrange a staff escort for mechanical/back-of-house.
2. Photograph HVAC, lighting, envelope, and any in-scope systems.
3. Inventory systems: HVAC type + age; lighting fixture count/type/wattage; refrigeration units; envelope condition.
4. Summarize 12 months of utility use (kWh / therms) from the bills.
5. Take the in-scope measurements (light levels, unit temperatures, seal condition).
6. Rank no-cost/low-cost measures, then capital measures, with rough savings logic.
7. Enter inventory, measurements, utility summary, photos, and the ranked measure list; sign.

What counts as done

Photos of HVAC, lighting, envelope
GPS / address confirm
12-month utility use summary
Ranked retrofit list naming the follow-on install job for each shortfall
Site record: the exact site's name and street address, and the contact who agreed to the work

Proof is measured against these, not judged by taste.

The standard this serves

Energy Efficiency Audit. Energy efficiency work begins with the walkthrough audit, the kind the ASHRAE standard describes: a trained eye moving through a building, reading the bills, the walls, the lights, and the equipment, and coming out with the short list of fixes worth doing first. Mastery looks like an auditor who can feel where a building is bleeding money within the hour, and prove it on paper. That instinct is trained by repetition on real buildings. This packet is one repetition: one system observed, one reading taken, one finding recorded the way the standard asks.

What is promised, and what is not

Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.

Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.

An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.

Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.

Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.

Other acts: vote, pledge, fund

Vote for it, free Pledge backing, free

Packet WORK_1794292886878_phduyn5