a small retail strip at the 900 block of W Manchester Ave, Los Angeles, CA 90003 (restrooms + utility sink)
Fixture + roof runoff audit -- a small retail strip.
An auditor photographs each restroom and utility-sink fixture at a small retail strip at the 900 block of W Manchester Ave, times its flow into a catch bag, reads the meter, and notes the roof's downspout for rainwater capture. Read all of it
Not funded yet. Settles as earned credit, $440 proposed.
Proof it takes, the deadline, the level
- Proofphoto per fixture + address + flow rates + roof/downspout capture-potential note + meter check
- Open until2026-12-25
- Leveladvanced
All of it: the words, the place, the proof
Check the restroom fixtures and utility sink at a small retail strip at the 900 block of W Manchester Ave, Los Angeles, CA 90003. This retail strip has never had them checked for flow rate, leaks, or rainwater-capture potential. Confirm with the site's host before you claim: this listing names a block, not a building, and does not mean any owner asked for the work.
Offer to pay $440. The receipt lands onchain once the proof is approved.
Safety, read before you claim
No electrical or plumbing disassembly beyond fixture aerators, escort required. Documentation only, with wet-floor caution.
The full safety list for this job:
- Hazards here: wet floors, water splashed during flow tests, trip hazards and dusty corners. Wear closed-toe shoes with grip, keep your hands off equipment and wash your hands after handling the dye tablets. Stop and leave the area if you see exposed wiring, smell gas or smoke, or are asked to open a panel or a hatch. Needs a worker who has done this kind of work before; this job asks for no license or certificate. The owner or escort briefs you on the building's rules before you start.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- flow-rate measurement bag + timer
- toilet dye tablets
- moisture meter
- GPS / address
- camera
- tablet / data sheet
Steps
- 1. Confirm the address; get a staff escort; photograph each fixture group.
- 2. Measure flow rate at each faucet/shower with the bag-and-timer method; record gallons per minute (gpm).
- 3. Test each toilet for leaks with a dye tablet (wait 10 min, check for color in the bowl); record flush volume.
- 4. Inspect fixtures, meters, and irrigation for visible leaks/drips; note each.
- 5. Read the water meter with all fixtures off; note any movement (indicates a hidden leak).
- 6. Rank WaterSense fixture upgrades + leak repairs by estimated water/cost savings.
- 7. Record flow rates, leak results, meter check, ranked measures, and photos into the proof record; sign.
What counts as done
- Photos of fixtures and the accessible roof drain line
- Address confirm
- Flow rate (gpm) per fixture
- Roof area + downspout location noted for rainwater-capture sizing
- Ranked upgrade measures naming the follow-on install job
- Site record: the exact site's name and street address, and the contact who agreed to the work
Proof is measured against these, not judged by taste.
The standard this serves
Water Efficiency. Water efficiency is the quiet discipline of wasting nothing indoors. The EPA's WaterSense program sets the marks: how many gallons a minute a faucet should pass, how to find the leak that runs a toilet all night, how a household's water bill tells a story. Mastery looks like an auditor who can walk a home in an hour and find every hidden gallon. The skill is built one fixture at a time, which is exactly what this packet asks: measure one flow, find one leak, record one truth about where the water goes.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1794292971880_ue8b0xv