a ground-floor unit on the 600 block of S Alvarado St, Los Angeles, CA 90057
Document the moisture sources.
Map where the rain water is getting in at the ground-floor unit on S Alvarado St in Los Angeles. Read all of it
Not funded yet. Settles as earned credit, $520 proposed.
Proof it takes, the deadline, the level
- Proofmoisture-source photo map + humidity readings + household symptom note + GPS
- Open until2026-12-25
- Levelintermediate
All of it: the words, the place, the proof
Map where the rain water is getting in at the ground-floor unit on S Alvarado St in Los Angeles. A resident on this block reports a musty smell after every rain. The survey turns 'it smells damp' into a photographed, measured plan the household can act on. Confirm with the site's host before you claim: this listing names a block, not a building, and does not mean any owner asked for the work.
Offer to pay $520. The receipt lands onchain once the proof is approved.
Safety, read before you claim
Observation only, N95 + gloves worn, never disturb, scrub or demo any visibly affected material during the survey. Any patch beyond a small spot, or affected material inside ductwork, routes to a qualified remediation contractor instead of this survey closing it out.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- camera
- pin/pinless moisture meter
- hygrometer (indoor relative humidity by room)
- flashlight (attic/crawl/basement/under-sink)
- tape measure (visible-mold extent vs the EPA 10-sq-ft threshold)
- N95 respirator + nitrile gloves (surveyor protection, no disturbance)
Steps
- 1. Start with the household's experience: where it smells musty, who has symptoms, when it started, what flooding/leak history the home has. Their answers target the survey: this is their claim of a dry, breathable home.
- 2. Hunt moisture sources room by room and in attic/crawl/basement: active leaks (roof, plumbing, windows), condensation surfaces, grade/drainage problems at the foundation, bath/kitchen/dryer exhaust termination, and HVAC condensate; photograph each and take moisture-meter readings at suspect assemblies.
- 3. Record indoor relative humidity by room (target <60%, ideally 30-50% per EPA) and note dehumidification or ventilation gaps.
- 4. Document visible mold WITHOUT disturbing it: location, surface/material, and measured extent per patch, classed against the EPA threshold (under ~10 sq ft = careful DIY-cleanable per EPA guidance; over = professional remediation).
- 5. Build the moisture-first sequence: fix the water FIRST (each source mapped to the right trade: roofer, plumber, drainage), then dry, then remediate, then rebuild; mark what the household can safely do (small-area cleanup per EPA steps, humidity control) vs what routes to pros.
- 6. Enter photos, GPS/address, the moisture-source map, humidity/moisture readings, the mold extent inventory, and the sequenced plan; sign. Real (found and measured), Proven (photo+GPS+signature), One-of-one (this home's water, this family's air).
What counts as done
- Photo map of every found moisture source with moisture-meter readings
- Room-by-room relative-humidity log
- Household symptom/leak history in their own words
- Sequenced moisture-first plan naming the right trade per source
- Site record: the exact site's name and street address, and the contact who agreed to the work
Proof is measured against these, not judged by taste.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1794293037549_rnoj9hp