an apartment building on the 600 block of S Alvarado St, Los Angeles, CA 90057
Score an Alvarado Street apartment building against the LBC Energy Petal.
Walk the apartment building on S Alvarado St in Los Angeles for wasted energy, heat loss and stale air. Read all of it
Not funded yet. Settles as earned credit, $500 proposed.
Proof it takes, the deadline, the level
- Proofphoto-documented checklist + ranked retrofit list + owner acknowledgment + GPS
- Open until2026-12-25
- Leveladvanced
All of it: the words, the place, the proof
Walk the apartment building on S Alvarado St in Los Angeles for wasted energy, heat loss and stale air. With the gutters, envelope and low-hanging weatherization done, what is left is a ranked list toward net-positive energy, including whether the roof can host solar. Confirm with the site's host before you claim: this listing names a block, not a building, and does not mean any owner asked for the work.
Offer to pay $500. The receipt lands onchain once the proof is approved.
Safety, read before you claim
Owner-invited walk-through; observe and photograph only, never open electrical equipment or operate building systems.
The full safety list for this job:
- Hazards here: wet floors, trip hazards, hot or moving equipment and dusty corners. Wear closed-toe shoes with grip, keep your hands off equipment and wear gloves for anything damp or dusty. Stop and leave the area if you see exposed wiring, smell gas or smoke, or are asked to open a panel or a hatch. Needs a worker who has done this kind of work before; this job asks for no license or certificate. The owner or escort briefs you on the building's rules before you start.
How this work is done
How this work is done
A documented method, so this packet comes out the same whoever does it.
Bring
- tablet/clipboard
- tape measure
- light meter (lighting scope)
- clamp thermometer (refrigeration scope)
- 12-month utility bills
- camera
- ladder + spotter (high fixtures)
Steps
- 1. Confirm the address; arrange a staff escort for mechanical/back-of-house.
- 2. Photograph HVAC, lighting, envelope, and any in-scope systems.
- 3. Inventory systems: HVAC type + age; lighting fixture count/type/wattage; refrigeration units; envelope condition.
- 4. Summarize 12 months of utility use (kWh / therms) from the bills.
- 5. Take the in-scope measurements (light levels, unit temperatures, seal condition).
- 6. Rank no-cost/low-cost measures, then capital measures, with rough savings logic.
- 7. Enter inventory, measurements, utility summary, photos, and the ranked measure list; sign.
What counts as done
- Completed Energy-Petal checklist with photos per system
- Ranked retrofit list naming the follow-on DOING job per shortfall
- Owner/manager acknowledgment note or photo
- Site record: the exact site's name and street address, and the contact who agreed to the work
Proof is measured against these, not judged by taste.
The standard this serves
Energy Efficiency Audit. Energy efficiency work begins with the walkthrough audit, the kind the ASHRAE standard describes: a trained eye moving through a building, reading the bills, the walls, the lights, and the equipment, and coming out with the short list of fixes worth doing first. Mastery looks like an auditor who can feel where a building is bleeding money within the hour, and prove it on paper. That instinct is trained by repetition on real buildings. This packet is one repetition: one system observed, one reading taken, one finding recorded the way the standard asks.
What is promised, and what is not
Three separate acts, never one: a vote is a free signed preference that moves no money; a pledge is free signed backing intent, balance-checked, that moves no money and never marks the packet funded; funding is a real payment, made by the payer straight to the worker, with no Vealth fee. Paying Vealth is closed: Vealth takes no new card or wallet payment for a job. To fund a job, offer to pay the worker directly, then pay them yourself when you accept the proof, from your own wallet or by your own card or bank. From a wallet: prepare_token_offer, sign, submit_token_offer; after the proof is accepted you pay the worker on chain and the worker records it (prepare_token_settlement, or POST /labor/settle for USDC on Base). By card or bank: prepare_direct_offer, sign, submit_direct_offer; you pay the worker yourself and the worker records it with prepare_direct_settlement. Both are free, need no gas, and move no money through Vealth.
Claiming is free. You sign to prove the wallet is yours: no card, no deposit, no fee. Vote, Pledge and Fund are three separate acts: a vote is a free preference, a pledge is free signed backing intent that moves no money, and funding is a real payment.
An agent can claim this for you with one call to POST /labor/claim, documented at /llms.txt.
Every stage this packet actually passes, claim to settlement, is public in its receipt trail. A stage that has not happened is not claimed.
Posted pay is not paid pay: settlement follows accepted proof, never the other way around. Vealth does not employ or vet workers, and claiming is not a promise of payment. See how proof and receipts work.
Other acts: vote, pledge, fund
Packet WORK_1794293044193_9o3p6r1